wevsspot Posted July 11, 2011 Posted July 11, 2011 CPU Voltage - to push much past 3.6Ghz you'll need to take off of Auto and enter a static CPU voltage. Since you can do 3.6Ghz at 1.22v you need to find out at what cpu frequency 1.22 volts just wont cut it anymore - then bump the vcore up to 1.25v and start testing again (warning - at your current voltages and cpu frequency you are at about the max load temp limit I'd be comfortable running at 24/7 - so to go much further you'll need to consider aftermarket cooling) Load Line Calibration - change from Auto to Enabled Memory Voltage - change from Auto to the voltage specified for your RAM by the manufacturer CPU Spread Spectrum - Disabled PCIe Spread Spectrum - Disabled Other than that you're doing pretty darned good considering that you haven't messed with much else. Congrats. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted July 11, 2011 Posted July 11, 2011 CPU Voltage - to push much past 3.6Ghz you'll need to take off of Auto and enter a static CPU voltage. Since you can do 3.6Ghz at 1.22v you need to find out at what cpu frequency 1.22 volts just wont cut it anymore - then bump the vcore up to 1.25v and start testing again (warning - at your current voltages and cpu frequency you are at about the max load temp limit I'd be comfortable running at 24/7 - so to go much further you'll need to consider aftermarket cooling) Load Line Calibration - change from Auto to Enabled Memory Voltage - change from Auto to the voltage specified for your RAM by the manufacturer CPU Spread Spectrum - Disabled PCIe Spread Spectrum - Disabled Other than that you're doing pretty darned good considering that you haven't messed with much else. Congrats. Maybe throw a cheap Sunbeam Core Contact 120mm or Corsair A70 on that little guy Share this post Link to post Share on other sites More sharing options...
Unsealed Posted July 11, 2011 Posted July 11, 2011 (edited) CPU Voltage - to push much past 3.6Ghz you'll need to take off of Auto and enter a static CPU voltage. Since you can do 3.6Ghz at 1.22v you need to find out at what cpu frequency 1.22 volts just wont cut it anymore - then bump the vcore up to 1.25v and start testing again (warning - at your current voltages and cpu frequency you are at about the max load temp limit I'd be comfortable running at 24/7 - so to go much further you'll need to consider aftermarket cooling) Load Line Calibration - change from Auto to Enabled Memory Voltage - change from Auto to the voltage specified for your RAM by the manufacturer CPU Spread Spectrum - Disabled PCIe Spread Spectrum - Disabled Other than that you're doing pretty darned good considering that you haven't messed with much else. Congrats. I did everything like you said! Also i have a few questions 1- Since my auto gives me about 1.2v for 3.6ghz should i try to manually set it lower lets say 1.18v or whatever to lower my consumption/heat etc since people said they overvolt a bit on auto? (It's called core voltage right?) 2- Would it benefit me Temp wise? 3- Also should i try to apply new thermal paste on it? (Arctic Silver 5, high density polysynthetic silver compound) 4- About the memory voltage, how can i tell? Everest states this: DIMM1: Kingston 2G-UDIMM 2 GB DDR2-800 DDR2 SDRAM (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz) Thanks for the answers. Edited July 11, 2011 by Unsealed Share this post Link to post Share on other sites More sharing options...
Unsealed Posted July 11, 2011 Posted July 11, 2011 I'm having tons of fun, applying new thermal paste atm i watched a few videos on youtube it seems simple hopefully i drop some degrees! =P Share this post Link to post Share on other sites More sharing options...
mattyamdfanboi Posted July 11, 2011 Posted July 11, 2011 U S Share this post Link to post Share on other sites More sharing options...
Unsealed Posted July 12, 2011 Posted July 12, 2011 Maybe throw a cheap Sunbeam Core Contact 120mm or Corsair A70 on that little guy I checked and my PSU is an ocz Share this post Link to post Share on other sites More sharing options...
Unsealed Posted July 12, 2011 Posted July 12, 2011 Is a corsair H60 overkill? Because they are at just 50 bucks on NCIX xD Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted July 12, 2011 Posted July 12, 2011 Ok good, H60 for 50 seems like a very good deal! Share this post Link to post Share on other sites More sharing options...
mattyamdfanboi Posted July 12, 2011 Posted July 12, 2011 H60 is a top cooler and if it's that cheap go for it!! Share this post Link to post Share on other sites More sharing options...
Unsealed Posted July 12, 2011 Posted July 12, 2011 (edited) I couldn't catch the sale for the h60 on NCIX, on a good note my system is very stable at 1.18v for 3.6ghz! So far i have my AI Overclock Tuner: Manual FSB Freq : 400 PCIE Freq : 100 FSB strap to NB: Auto Dram Freq: Auto Dram Timing Control: Auto Dram Static read control: Auto Dram Read Training: Auto MEM. OC charger: Auto Ai Clock Twister: auto Ai Transaction booster: Auto Cpu Voltage : 1.18125 FSB termination volt: Auto Memory Voltage : Auto ( It says 1.8v on my ram should i put it that?) NB Voltage : Auto SB Voltage: Auto Load-Line Calibration: Enabled CPU GTL Reference: Auto CPU spread Spectrum: Disabled PCIE spread Spectrum: Disabled CPU clock skew: Auto NB clock skew: Auto CPU Margin Enhancement: Optimized Anything i should change To improve my performance and reduce my cpu temp? atm i idle at 33 load @ 58 max!! thanks for the advices guys! Edit: I am also trying to lower the cpu voltage to 1.16v to see if it's gonna be stable is it a good idea? xD Edited July 12, 2011 by Unsealed Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted July 13, 2011 Posted July 13, 2011 Yes, if you don't plan on immediately overclock any higher then by all means lower the voltage as far as you are able. Share this post Link to post Share on other sites More sharing options...
Unsealed Posted July 13, 2011 Posted July 13, 2011 Last question what do i put for V Ram most people told me to actually input it, does it really matter and if yes how much should i put it at? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now