F13Bubba Posted March 10, 2011 Posted March 10, 2011 I just got my Coller Master Hyper212+, and after an extremely stressful install, in which I got it completely mounted, and had to take it all out (I forgot to use the rubber sticky pads on the back...metal straight on the mobo is NOT good...) I've gotten my cpu up to 3.48 ghz without increasing the voltage. Stock idle temps before the new cooler were hovering around 43-48, loads around 55. Stock idle with the 212+ was 26-32, and OC'd is around 35-40 I have yet to test it on load, anyone have any good suggestions for a load testing program? Share this post Link to post Share on other sites More sharing options...
Waco Posted March 10, 2011 Posted March 10, 2011 IntelBurnTest / OCCT Linpack Share this post Link to post Share on other sites More sharing options...
SpeedCrazy Posted March 10, 2011 Posted March 10, 2011 For normal use load, i find folding is quite good. I uses more reasources than you probably ever will(i am assuming) and it has bsod'ed an oc that was prime stable several times(go figure). I guess it is because prime is steady load and this fluctuates across ram and cpu. Share this post Link to post Share on other sites More sharing options...
F13Bubba Posted March 10, 2011 Posted March 10, 2011 (edited) I installed prime95 and ran the torture test. Looks like I get up to between 65-70 degrees at load with these settings. I wonder if I should drop down my clocks a bit... Of course, that was only for about 5 minutes. Edited March 10, 2011 by F13Bubba Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 10, 2011 Posted March 10, 2011 I think IntelBurnTest will load it the hardest Share this post Link to post Share on other sites More sharing options...
Boinker Posted March 10, 2011 Posted March 10, 2011 I gots one of dem. its a nice hsf for only THIRTY FIVE DOLLARS....... mine stable @ 3.80. 1.30v llc on and load temperatures are 85c Share this post Link to post Share on other sites More sharing options...
F13Bubba Posted March 10, 2011 Posted March 10, 2011 I gots one of dem. its a nice hsf for only THIRTY FIVE DOLLARS....... mine stable @ 3.80. 1.30v llc on and load temperatures are 85c Yeah...especially when I got mine for $8 Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 10, 2011 Posted March 10, 2011 what's the max those i5's can run? Share this post Link to post Share on other sites More sharing options...
F13Bubba Posted March 10, 2011 Posted March 10, 2011 what's the max those i5's can run? I've heard of them getting to 4.2 Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 10, 2011 Posted March 10, 2011 temps I meant Share this post Link to post Share on other sites More sharing options...
GabrielT Posted March 10, 2011 Posted March 10, 2011 Temperature wise 100c is the limit but I don't know anyone who feels comfortable over 85c. Basically as hot as you want to go but I don't like seeing mine over 90c. I had mine at 4.0Ghz for awhile but I couldn't get it stable. It would fold ok for a few days then shut down. Intel Burn Test put the temps in the 90+ area and I didn't like it. You should be able to do 3.8Ghz with around 1.28v vcore. I set mine at an even 1.3 for stability. Just be warned. Above 3.8Ghz there is a serious wall with these procs where they just they start putting out a tone of heat. Mine is 3.9Ghz. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now