jackbrennan2008 Posted February 9, 2011 Posted February 9, 2011 ok so if i want to overclock with turbo boost on. do i leave the CPU multiplier and just adjust the turbo ratio and cpu vcore? Yep. Have a look at E.Captains guide and also check out this one. Share this post Link to post Share on other sites More sharing options...
Alexandre Posted February 9, 2011 Posted February 9, 2011 Yep. Have a look at E.Captains guide and also check out this one. That is one nice guide you linked there! I might just save that for future references Share this post Link to post Share on other sites More sharing options...
aussieOC92 Posted February 10, 2011 Posted February 10, 2011 i disabled turbo boost and changed the cpu multiplier to x45 and put the vcore up to 1.320 and wen running IBT im getting a BSOD. code 124. i dont want to take the voltage up anymore as its getting a lil hot got to 65 then blue screened. Share this post Link to post Share on other sites More sharing options...
jackbrennan2008 Posted February 10, 2011 Posted February 10, 2011 i disabled turbo boost and changed the cpu multiplier to x45 and put the vcore up to 1.320 and wen running IBT im getting a BSOD. code 124. i dont want to take the voltage up anymore as its getting a lil hot got to 65 then blue screened. Do you have any Load Line Calibration (LLC) on? If not, try Level 1 or even try lowering the Vcore with level 1. Share this post Link to post Share on other sites More sharing options...
aussieOC92 Posted February 10, 2011 Posted February 10, 2011 all my board offers for LLC is ENABLE, DISABLE and AUTO. ive got it running at 4.2ghz 1.265 v core. and turbo disabled. ran IBT and temps didnt exceed 60 on the hottest core. i have LLC enabled atm Share this post Link to post Share on other sites More sharing options...
jackbrennan2008 Posted February 10, 2011 Posted February 10, 2011 all my board offers for LLC is ENABLE, DISABLE and AUTO. ive got it running at 4.2ghz 1.265 v core. and turbo disabled. ran IBT and temps didnt exceed 60 on the hottest core. i have LLC enabled atm Well if your happy with the overclock that's whats counts and if you're not interested in pushing the Vcore higher than 1.32 i think you should be happy in the 4.2-4.5 range. Share this post Link to post Share on other sites More sharing options...
aussieOC92 Posted February 10, 2011 Posted February 10, 2011 jack, hwo have you managed 4.5ghz at 1.265v? have you adjusted the 100mhz?. can you give me a screen shot or details of ur bios. NO im not going to copy exactly wat you have done as we have different boards and YES i know every cpu is different. but uno i would like to use it as a ref. Share this post Link to post Share on other sites More sharing options...
jackbrennan2008 Posted February 10, 2011 Posted February 10, 2011 jack, hwo have you managed 4.5ghz at 1.265v? have you adjusted the 100mhz?. can you give me a screen shot or details of ur bios. NO im not going to copy exactly wat you have done as we have different boards and YES i know every cpu is different. but uno i would like to use it as a ref. Template Available here ### MB Intelligent Tweaker ### Advanced Frequency Settings: CPU Clock Ratio .......................................[ 45 > Advanced CPU Core Features Internal CPU PLL Overvoltage...........................[ AUTO Real Time Ratio Changes In OS .........................[ Disabled Intel® Turbo Boost Tech .............................[ Disabled Turbo Ratio (Core 1)...................................[ Auto Turbo Ratio (Core 2)...................................[ Auto Turbo Ratio (Core 3)...................................[ Auto Turbo Ratio (Core 4)...................................[ Auto Turbo Power Limit (Watts)..............................[ Auto Turbo Current Limit (Amps).............................[ Auto CPU Cores Enabled ............................ ........[ All CPU Multi Threading....................................[ Enabled CPU Enhanced Halt (C1E) ...............................[ Enabled C3/C6 State Support ...................................[ Enabled CPU Thermal Monitor ...................................[ Enabled CPU EIST Function .....................................[ Enabled Bi-Directional PROCHOT ................................[ Enabled < BCLK/DMI/PEG Clock Control ............................[ Enabled BCLK/DMI/PEG Frequency Control ........................[ 1002 System Memory Multiplier (SPD) ........................[ 18.66 Advanced Voltage Control: CPU Load Line Calibration .................................[ Level 1 (Enabled for your motherboard) CPU Vcore .............................................[ 1.285 QPI/VTT Voltage 1.050v ................................[ AUTO System Agent Voltage 0.925v ...........................[ AUTO PCH Core 1.050v .......................................[ AUTO CPU PLL 1.800v ........................................[ AUTO I've just listed the CPU features of the BIOS and left out everything else. basically all i did was set the Vcore to 1.285 and enabled LLC and set the voltage for my ram and that's it. No tricks or any fancy stuff. Just a small Vcore boost with Load line calibration enabled. Share this post Link to post Share on other sites More sharing options...
aussieOC92 Posted February 10, 2011 Posted February 10, 2011 ok i copied ur bios settings . got everything set the same as yours except the ram settings as we have dif ram. i ran ibt and the test completed at 118.58 secs. it said it was stable but wen running the test the little animated 'flame' was really lagging, it didnt freeze but was very slow at moving. in ibt i set it to stress level : standard, threads : 8 and i got roughly time: 18.5 and Gflops: 49. i also did super PI and for 1m i got 8.330. could you run the same tests and tell me wat you get? also what are your temps? my hottest core got to 64. which was core 2. but my coolest core was core 0 at 55 degrees. so thats 9 degrees difference. and my room temp is 21. im really thankful for your very helpful replies. i understand how it works i just want to compare Share this post Link to post Share on other sites More sharing options...
aussieOC92 Posted February 10, 2011 Posted February 10, 2011 also i got my cpu batch number. i dont know much about how to check if my cpu is a special one etc. but i would appreciate it if u or someone could tell me. anyways heres my batch number. BATCH# L047A898 Share this post Link to post Share on other sites More sharing options...
jackbrennan2008 Posted February 10, 2011 Posted February 10, 2011 ok i copied ur bios settings . got everything set the same as yours except the ram settings as we have dif ram. i ran ibt and the test completed at 118.58 secs. it said it was stable but wen running the test the little animated 'flame' was really lagging, it didnt freeze but was very slow at moving. in ibt i set it to stress level : standard, threads : 8 and i got roughly time: 18.5 and Gflops: 49. i also did super PI and for 1m i got 8.330. could you run the same tests and tell me wat you get? also what are your temps? my hottest core got to 64. which was core 2. but my coolest core was core 0 at 55 degrees. so thats 9 degrees difference. and my room temp is 21. im really thankful for your very helpful replies. i understand how it works i just want to compare My temperatures are 25c (coolest core) Idle and 49c(Hottest core) load, but i'm under watercooling, ambient 21c. I get 8.381s in super pi 1M. I wouldn't worry too much about the IBT logo flickering as it's most likely doing that because it's eating up your system resources. I'd say your system is working as intended . Share this post Link to post Share on other sites More sharing options...
aussieOC92 Posted February 10, 2011 Posted February 10, 2011 well my idle temps are 33. so i think i might have to re seat my NH-d14, i didnt put a lot of paste on tho. i only put a little bit. but i think i didnt put enough as it might not be spreading evenly. also wat are your results for IBT? set it to the same as i did and get back to me with your results. and i searched my BATCH and 1 person got good clocks and the other got bad clocks. :\. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now