IVIYTH0S Posted August 28, 2010 Posted August 28, 2010 no ive tryed the bus speed as well i took it to 3.8ghz with the multi and uped the bus speed to take it to 3.9 and 4 i cant get either stable even with droping the ram frequency should i try lowering the multi and uping the bus speed? any ideas would be greatly appreciated maybe adjusting the north or south bridge i dont know ive never done it before. oh yeah and i figured out the "bccode 9c" thats not an issue any more. + ive seen a guy who has a 555 on my board stable at 4ghz but was a very old post on a random forum so couldnt find anything out. what are your HT link and CPUNB frequencies?? Share this post Link to post Share on other sites More sharing options...
maj0rgamer Posted August 28, 2010 Posted August 28, 2010 temps aren't a problem are they? Share this post Link to post Share on other sites More sharing options...
punkishbloke Posted August 28, 2010 Posted August 28, 2010 (edited) temps aren't a problem are they? max temp at load is 36 at 3.8ghz with ht link of 2000mhz and nb frequency of 2000mhz according to cpuz sorry i dont know much about nb and ht setup. Edited August 28, 2010 by punkishbloke Share this post Link to post Share on other sites More sharing options...
joel.monteiro Posted August 28, 2010 Posted August 28, 2010 they should be stable at 2000 HT and NB,get a small fan and face it to ur mosfets and then try to oc. Share this post Link to post Share on other sites More sharing options...
punkishbloke Posted August 28, 2010 Posted August 28, 2010 they should be stable at 2000 HT and NB,get a small fan and face it to ur mosfets and then try to oc. so you dont recon droping the ht will help? Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted August 28, 2010 Posted August 28, 2010 keep the HT at 2000 and raise the CPUNB to 2400 and check it out Share this post Link to post Share on other sites More sharing options...
punkishbloke Posted August 29, 2010 Posted August 29, 2010 keep the HT at 2000 and raise the CPUNB to 2400 and check it out so heres the most stable ive got it cpu multiplier 16 bus speed 250 vcore 1.5v ht link 1750 nb frequency 2000 managed 5 mins in prime95 all temps below 36 degreas according to speed fan. droping the ht seemed to help but uping the nb didnt help so i dropped it back ive not messed with the nb voltage not realy sure what the stock should be or if it will help to up it. Im racking my brains with this one now 1.5v seems high for the vcore on a dual core and i dont think i should go any higher i am desperate for any ideas or help that anyone cant give me. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now