R1P5AW Posted February 13, 2010 Posted February 13, 2010 How many feet of tubing would I need to start with a simple single loop setup? Also, do you recommend spliting the tubing with a drain port at the bottom? Share this post Link to post Share on other sites More sharing options...
johnnyfive Posted February 14, 2010 Posted February 14, 2010 Id say at least 8 feet. That gives you lots of options on placement, and if you screw up, you have extra tubing if needed. It should be way more than you need, but better to have extra than not enough. The one thing I wish I had in my loop was a drain port. It would make things a lot easier. Share this post Link to post Share on other sites More sharing options...
Hyper Posted February 14, 2010 Posted February 14, 2010 Id say at least 8 feet. That gives you lots of options on placement, and if you screw up, you have extra tubing if needed. It should be way more than you need, but better to have extra than not enough. The one thing I wish I had in my loop was a drain port. It would make things a lot easier. I kind of wish I would have put one (rather 2, one for each loop) in as well... Share this post Link to post Share on other sites More sharing options...
redj41 Posted February 14, 2010 Posted February 14, 2010 I would say 8-10 feet to start. I've used 10 foot pieces both times and had a little extra left over, but having too much is better than not enough. I wish I had a drain port as well. I'm definately adding one next time I take everything apart. Share this post Link to post Share on other sites More sharing options...
R1P5AW Posted February 16, 2010 Posted February 16, 2010 I started a Worklog for the project and am pumped to get going. Thanks for the initial help OCC'rs! Share this post Link to post Share on other sites More sharing options...
R1P5AW Posted February 16, 2010 Posted February 16, 2010 (edited) I need help selecting a few parts. Please comment and offer advice on my planned setup. My current build idea: Pump- Laing D4 (already bought) http://www.swiftnets.com/PRODUCTS/mcp650.asp http://www.hardforum.com/showthread.php?t=1370852 Cpu block- DD MC-TDX (already bought) http://www.dangerden.com/store/mc-tdx-for-...cpu-boards.html Rad - Unsure (Black Ice Pro III or GTX 360) http://www.performance-pcs.com/catalog/ind...roducts_id=4185 http://www.frozencpu.com/products/5326/ex-...or_-_Black.html please make recommendations. I'm leaning towards the Pro III b/c it's cheap and has good reviews from what i've seen Res - would like cylindrical external mounting such as: http://www.sidewindercomputers.com/biwataz400po.html Tubing - Tygon 1/2" ID 3/4 OD or 7/16" ID 5/8 OD I appreciate all comments and advice. Thanks Edited February 16, 2010 by R1P5AW Share this post Link to post Share on other sites More sharing options...
johnnyfive Posted February 16, 2010 Posted February 16, 2010 I have two of this rad and have had excellent performance from them: http://www.frozencpu.com/products/8523/ex-...l?tl=g30c95s161 It fits easily in the top of my HAF with fans and has room to spare. Its more expensive than the pro, but cheaper than the GTX. It works great for low speed (read low noise!) fans. Share this post Link to post Share on other sites More sharing options...
R1P5AW Posted February 17, 2010 Posted February 17, 2010 I bought an MCP655 pump and GTX360 rad tonight from schoolslave. I'll prob sell the D4. Can anyone make a good recomndation on a res for my setup? Share this post Link to post Share on other sites More sharing options...
R1P5AW Posted February 17, 2010 Posted February 17, 2010 if i utilize the fillport in my haf 932 can i get by w/o a res? Share this post Link to post Share on other sites More sharing options...
ekiM Posted February 17, 2010 Posted February 17, 2010 if i utilize the fillport in my haf 932 can i get by w/o a res? Yep Share this post Link to post Share on other sites More sharing options...
redj41 Posted February 19, 2010 Posted February 19, 2010 (edited) You can definately skip the reservoir until later (or completely) if you use a t-line and the fillport in the haf. Just make sure to get the system pretty full and keep an eye on the line coming off the fill port for a few days, so you can fill it back up as air is removed from the loop. I run my pump with a power supply jumper (so nothing else gets power) and pour coolant in through the fill port with a funnel (to keep the pump full so it doesn't burn up). Once things look about full, I let the pump run for a few hours to leak check and work out air from the system. I have the t line in my rig just before the pump intake, which helps keep air out of the pump (by allowing it to escape up the t line before flowing into the pump) as well as keeping a little extra fluid on the pump (to add net positive suction head and keep the pump full incase of a small leak). These aren't serious factors to consider in a computer liquid cooling setup, but it makes more sense (to me, at least) than plugging it in after the pump or somewhere else in the system. You can get a t-line from the hardware store (a poly t line is what I've been using, it was like 2 bucks), or buy fittings and a T junction block. They will perform about the same. Just make sure to keep the t-line at least a little full. Hope all is going well with the setup! Good luck and happy overclocking! Edited February 19, 2010 by redj41 Share this post Link to post Share on other sites More sharing options...
nanoprobe Posted February 20, 2010 Posted February 20, 2010 If you have a spare PSU it makes it much easier to fill and purge the air without having to start and stop the whole system. Just hook up the pump to the PSU. Use a paper clip and short across the GREEN wire and any black wire in the 24 pin harness. Plug The PSU into an outlet and turn on the power switch if it has one. PSUs without the power switch will start when plugged in. This will also reveal any leaks. FWIW I highly recommend a reservoir. It makes it much easier to purge out the air and much easier to monitor fluid levels and add fluid. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now