shiver_8 Posted April 7, 2009 Posted April 7, 2009 E8400 EO, 1.25 vid. GA-EP45-UD3P motherboard. OCZ Reaper 1066 ram. Settings are: 550x8. Ram@1100mhz w/2.3v (5-5-5-15). Voltages: 1.41vcore load and 1.44 idle (1.4875v in bios), 1.46v NB, 1.4v VTT, everything else on auto. Key was using a high fsb to run the ram 1:1 while being close to 1066mhz. HDT-S1283 cooler. Max temps during Prime95 mix test was 63/63C. Keep in mind I had to use the Xigmatek paste and I am getting some AS5 on there as soon as I get some. Should drop the temps to sub 60's. I'll get screenies up soon, but tonight I have to study for tests so likely by tomorrow for sure. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted April 7, 2009 Posted April 7, 2009 E8400 EO, 1.25 vid. GA-EP45-UD3P motherboard. OCZ Reaper 1066 ram. Settings are: 550x8. Ram@1100mhz w/2.3v (5-5-5-15). Voltages: 1.41vcore load and 1.44 idle (1.4875v in bios), 1.46v NB, 1.4v VTT, everything else on auto. Key was using a high fsb to run the ram 1:1 while being close to 1066mhz. HDT-S1283 cooler. Max temps during Prime95 mix test was 63/63C. Keep in mind I had to use the Xigmatek paste and I am getting some AS5 on there as soon as I get some. Should drop the temps to sub 60's. I'll get screenies up soon, but tonight I have to study for tests so likely by tomorrow for sure. vehehehery nice there . I wasn't impressed until I saw you were running my multi . Good work! Share this post Link to post Share on other sites More sharing options...
shiver_8 Posted April 7, 2009 Posted April 7, 2009 Thanks. Now to change my signature Share this post Link to post Share on other sites More sharing options...
Hyper Threaded Posted April 7, 2009 Posted April 7, 2009 Good job! On your thermal paste, you should research that first. Some new stuff is out now that sets up quicker and outperforms AS5. Share this post Link to post Share on other sites More sharing options...
shiver_8 Posted April 7, 2009 Posted April 7, 2009 Ok thanks.. good to know. I might just use the AS5 anyways since my uncle said he might have some laying around. In that case no sense in spending $5 shipping on a $7 tube of thermal paste from newegg Share this post Link to post Share on other sites More sharing options...
shiver_8 Posted April 7, 2009 Posted April 7, 2009 Screenshot: http://i282.photobucket.com/albums/kk274/d...44prime95-1.png For the Prime95 shot that temperature doesn't change at all. I left it for hours and it that's where it peaked, 64C. That is with 25C room temp and 36C idling. Also I did SuperPi but the screenshot for that won't work on photobucket... it comes out really small, but the time was 10.2 something. I'll try and get it later. And for anyone who is interested I bumped up the vcore in bios to 1.05625 to help it out a bit and lowered NB to 1.42, and fsb to 1.36. This was still stable after I bumped the vcore, while only gaining an extra 1C on the cpu. Rather have 1C more on the cpu than 10C on the board. Share this post Link to post Share on other sites More sharing options...
FEEDTHEADDICTION Posted April 8, 2009 Posted April 8, 2009 Good job! On your thermal paste, you should research that first. Some new stuff is out now that sets up quicker and outperforms AS5. What is the name of this "new stuff"? Where can I get some? Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted April 8, 2009 Posted April 8, 2009 What is the name of this "new stuff"? Where can I get some? Here's a good review that covers alot of Thermal Compounds out there Share this post Link to post Share on other sites More sharing options...
Hyper Threaded Posted April 8, 2009 Posted April 8, 2009 What is the name of this "new stuff"? Where can I get some? Right here. Share this post Link to post Share on other sites More sharing options...
shiver_8 Posted April 9, 2009 Posted April 9, 2009 Cheers boys. You won't believe it, just got stability at 4.5ghz with 1.488v load on the cpu. Getting max temps of 64C with the Xigmatek cooler and crappy butt Zalman thermal pasts. Oh and I lowered the FSB to 500 and upped multi to 9 get it stable. Also have NB at 1.42 and VTT at 1.4. I have to finishing typing something up for school and after that later this evening I'll throw up a screenshot :thumbs-up: Share this post Link to post Share on other sites More sharing options...
cjloki Posted April 9, 2009 Posted April 9, 2009 E8400 EO, 1.25 vid. GA-EP45-UD3P motherboard. OCZ Reaper 1066 ram. Settings are: 550x8. Ram@1100mhz w/2.3v (5-5-5-15). Voltages: 1.41vcore load and 1.44 idle (1.4875v in bios), 1.46v NB, 1.4v VTT, everything else on auto. Key was using a high fsb to run the ram 1:1 while being close to 1066mhz. HDT-S1283 cooler. Max temps during Prime95 mix test was 63/63C. Keep in mind I had to use the Xigmatek paste and I am getting some AS5 on there as soon as I get some. Should drop the temps to sub 60's. I'll get screenies up soon, but tonight I have to study for tests so likely by tomorrow for sure. wow that's really nice...!! B:) Share this post Link to post Share on other sites More sharing options...
shiver_8 Posted April 9, 2009 Posted April 9, 2009 Here's the screenshot http://i282.photobucket.com/albums/kk274/d...45prime95-1.png Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now