Zertz Posted October 11, 2008 Posted October 11, 2008 Ran a few tests on my new Mushkin RAM and felt like benching those sticks 1120MHz is about the max frequency they would boot at 2.1V so all my tests are done at that speed and main timings are set to 5-5-4-14 After a few restart and minor tweaking I came up with that... Not too bad, but far from being great So I fired up memset and simply changed Performance Level from 9 to 6 (any lower resulted in a system lockup): Of course I had to shoot for more, so I tweaked it a bit more: So I gained about 400MB/s just by tweaking subtimings a bit, that's pretty good IMO I'll update this when I get the CPU clock up B:) Share this post Link to post Share on other sites More sharing options...
ccokeman Posted October 11, 2008 Posted October 11, 2008 560is about right on the money there. Mine do 559 and 563 respectively. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted October 11, 2008 Posted October 11, 2008 I want mushkin ram! Share this post Link to post Share on other sites More sharing options...
ocmooz Posted October 11, 2008 Posted October 11, 2008 (edited) Here's mine. Any suggestions? Edited October 11, 2008 by ocmooz Share this post Link to post Share on other sites More sharing options...
Zertz Posted October 11, 2008 Posted October 11, 2008 Here's mine. Any suggestions? If you can get the Performance Level any lower that helps alot, if not, just try slowly lowering them one by one Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted October 11, 2008 Posted October 11, 2008 wait so does that program let you tweak memory from windows? Share this post Link to post Share on other sites More sharing options...
Zertz Posted October 11, 2008 Posted October 11, 2008 Yep, it can be downloaded here Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted October 11, 2008 Posted October 11, 2008 Yep, it can be downloaded here wont windows crash with hot tweaking if the memory? Share this post Link to post Share on other sites More sharing options...
Zertz Posted October 11, 2008 Posted October 11, 2008 (edited) Yeah, the system will lock/restart sometimes Just don't use the save feature if you're not sure whether it'll work or not. Edited October 11, 2008 by Zertz Share this post Link to post Share on other sites More sharing options...
alpha1ma Posted October 11, 2008 Posted October 11, 2008 wahaha..great..i keep forgetting to get the memset program..thnx for the link.. Share this post Link to post Share on other sites More sharing options...
ocmooz Posted October 11, 2008 Posted October 11, 2008 If you can get the Performance Level any lower that helps alot, if not, just try slowly lowering them one by one Did that, but that's as much as I can do. <_< If I try and lower anything anymore I get lockup/restart. So is this as far as I can go? Sandra says its only 54.5% efficiency and I'd like to get it up to 75%, but then again 9GB/s isn't that bad... Share this post Link to post Share on other sites More sharing options...
Zertz Posted October 11, 2008 Posted October 11, 2008 9GB/s on Intel + DDR2 is pretty good. If it locks as soon as you decrease any timing then that's the best you'll get. Can you get any more MHz out of them? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now