Jump to content
Angry_Games

Socket LGA775 Overclocking Database

Recommended Posts

DFI LP UT P35 T2R, 2/14 BIOS

 

OCZ DDR2 PC2-8800 Gold Dual Channel 2GB (2 x 1GB) OCZ2G11002GK

 

Intel Core 2 Duo E8500 Wolfdale 3.16GHz 6M L2 Cashe ( Q807A217 ), Swifttech Storm Rev.2

 

BFG 8800GTX 768MB 384-bit GDDR3 PCI-E x16 @ 661/1116 ~ NVIDIA 169.21 drivers, DD NV-88GTX

 

2x Western Digital Caviar SE WD1600JS 160GB 7200 RPM 8MB Cache SATA 3.0Gb/s, RAID-0

 

SONY DVD RW DRU-700A

 

PC Power & Cooling Silencer 750 Quad (Black)

 

DD-D5 pump - Stealth GTS 360 Rad.

 

====================

 

 

[b]CPU Feature Page[/b][color=red]

Thermal Management Control................Enabled

PPM (EIST) Mode...........................Enabled

Limit CPUID MaxVal........................Disabled

CIE Function..............................Auto

Execute Disable Bit.......................Enabled

Virtualization Technology.................Enabled

Core Multi-Processing.....................Enabled[/color]



[b]Main BIOS Page[/b][color=red]

Exist Setup Shutdown......................Mode 2

Shutdown After AC Loss....................Disabled

O. C. Fail Retry Counter..................0

CLOCK VC0 Divider.........................Auto

CPU Clock Ratio...........................9x

CPU N/2 Ratio.............................Disabled

[i]  -Target CPU Clock.......................4203 MHz[/i]

CPU Clock.................................467 MHz

Boot Up Clock.............................Auto

DRAM Speed................................333/800

[i]  -Target DRAM Speed......................DDR2 1121[/i]

PCIE Clock................................100MHz

PCIE Slot Config..........................1X 1X



CPU Spread Spectrum.......................Disabled

PCIE Spread Spectrum......................Disabled

SATA Spread Spectrum......................Disabled[/color]



[b]Voltage Setting Page [/b][color=red]

CPU VID Control...........................Auto

CPU VID Special Add.......................110.62%

DRAM Voltage Control......................2.23V

SB 1.05V Voltage..........................1.070V

SB Core/CPU PLL Voltage...................1.55V

NB Core Voltage...........................1.45V

CPU VTT Voltage...........................1.10V

VCore Droop Control.......................Disabled

Clockgen Voltage Control..................3.45V

GTL+ Buffers Strength.....................Strong

Host Slew Rate............................Weak

GTL REF Voltage Control...................Enabled

CPU GTL 1/3 REF Volt......................50

CPU GTL 0/2 REF Volt......................50

North Bridge GTL REF Volt ................66[/color]



[b]DRAM Timing Page[/b][color=red]

Enhance Data Transmitting.................Fast

Enhance Addressing........................Fast

T2 Dispatch...............................Auto

Clock Setting Fine Delay..................Listed Below

CAS Latency Time (tCL)....................5

RAS# to CAS# Delay (tRCD).................5

RAS# Precharge (tRP)......................5

Precharge Delay (tRAS)....................15

All Precharge to Act......................5

REF to ACT Delay (tRFC)...................42

Performance LVL (Read delay)..............7

Read delay phase adjust...................Listed Below

MCH ODT Latency...........................2

Write to PRE Delay (tWR)..................12

Rank Write to Read (tWTR).................10

ACT to ACT Delay (tRRD)...................3

Read to Write Delay (tRDWR)...............8

Ranks Write to Write (tWRWR)..............4

Ranks Read to Read (tRDRD)................5

Ranks Write to Read (tWRRD)...............4

Read CAS# Precharge (tRTP)................2

ALL PRE to Refresh........................5[/color]



[b]Clock Setting Fine Delay Page[/b][color=red]

Ch1 Clock Crossing Setting................More Aggressive

DIMM 1 Clock fine delay...................Current 156ps

DIMM 2 Clock fine delay...................Current 556ps

Ch 1 Command fine delay...................Current 868ps

CH 1 Control fine delay...................Current 623ps





Ch2 Clock Crossing Setting................More Aggressive

DIMM 3 Clock fine delay...................Current 156ps

DIMM 4 Clock fine delay...................Current 623ps

Ch 2 Command fine delay...................Current 868ps

CH 2 Control fine delay...................Current 556ps



Ch1Ch2 CommonClock Setting................More Aggressive



Ch1 RDCAS GNT-Chip Delay..................Auto

Ch1 WRCAS GNT-Chip Delay..................Auto

Ch1 Command to CS Delay...................Auto



Ch2 RDCAS GNT-Chip Delay..................Auto

Ch2 WRCAS GNT-Chip Delay..................Auto

Ch2 Command to CS Delay...................Auto[/color]



[b]Read Delay Phase Adjust Page[/b][color=red]

[i]Ch1 Read delay phase(4~0)	6- 7- 7- 7- 6[/i]

Channel 1 Phase 0 Pull-In.................Auto

Channel 1 Phase 1 Pull-In.................Auto

Channel 1 Phase 2 Pull-In.................Auto

Channel 1 Phase 3 Pull-In.................Auto

Channel 1 Phase 4 Pull-In.................Auto



[i]Ch2 Read delay phase(4~0)	7- 7- 7- 7- 6[/i]

Channel 2 Phase 0 Pull-In.................Auto

Channel 2 Phase 1 Pull-In.................Auto

Channel 2 Phase 2 Pull-In.................Auto

Channel 2 Phase 3 Pull-In.................Auto

Channel 2 Phase 4 Pull-In.................Auto[/color]

 

 

 

====================

 

 

Prime 95, CPU-Z, 3Dmark2001SE, GPU-Z, MemSet:

 

3d01p9510hrlt9.th.jpg

 

 

3Dmark03, SuperPi 1M, CPU-Z, GPU-Z, MemSet:

 

3d03spi1msd6.th.jpg

 

 

3Dmark05, SuperPi 32M, CPU-Z, GPU-Z, MemSet:

 

3d05spi32mvb5.th.jpg

 

 

3Dmark06, Everest, CPU-Z, GPU-Z, MemSet:

 

3d06everestyt7.th.jpg

 

 

====================

 

 

shot description:

467 x 9 @ 4.2 GHz ~ Auto * 110.62 (1.34) Vcore

2Gig DDR2 1121 MHz (5-5-5-15-2T)

Share this post


Link to post
Share on other sites
Guest LithoTech

DFI LP DK P35-T2RS (01/09/2008 Beta BIOS)

 

Intel P4-640 Prescott 3.2GHz/800/2MB @ 4.0GHz (SL8Q7 8632B930 Jan 11/07)

 

2x1024 G.Skill 6400 NQ (F2-6400CL5D-2GBNQ)

 

eVGA 6800GS @ 425/1000, 91.47 Drivers

 

Seagate Barracuda 7200.10 250GB 16MB Sata2

 

Pioneer DVR-212D DVD R/W

 

OCZ StealthXStream 600W

 

HSPC Tech Station (Top Deck)

 

Arctic Cooling Freezer 7 Pro

 

 

==========

 

 

[b]Genie BIOS Setting:[/b]

[color=red]Exit Setup shutdown....................... - Mode 2

CLOCK VCO divider......................... - Auto

CPU Clock Ratio........................... - N/A

- Target CPU Clock........................ - 4000 MHz

CPU Clock................................. - 250 MHz

Boot Up Clock............................. - Auto

DRAM Speed................................ - 333/800

- Target DRAM Speed....................... - DDR2 1000

PCIE Clock................................ - 100 MHz



CPU Spread Spectrum....................... - Disabled

PCIE Spread Spectrum...................... - Disabled

SATA Spread Spectrum...................... - Disabled[/color]



[b]CPU Feature:[/b]

[color=red]Thermal Management Control................ - Disabled

PPM(EIST) Mode............................ - Disabled

Limit CPUID MaxVal........................ - Disabled

C1E Function.............................. - Disabled

Execute Disable Bit....................... - Enabled

Core Multi-Processing..................... - N/A[/color]



[b]Voltage Setting:[/b]

[color=red]CPU VID Control........................... - N/A

CPU VID Special Add....................... - +37.5mV (1.37 Bios 1.39 OS)

DRAM Voltage Control...................... - 1.9V

SB 1.05V Voltage.......................... - 1.070V

SB Core/CPU PLL Voltage................... - 1.55V

NB Core Voltage........................... - 1.35V

CPU VTT Voltage........................... - 1.2V

Clockgen Voltage Control.................. - 3.45V

CPU GTL 1/3  REF Volt..................... - 67

CPU GTL 0/2  REF Volt..................... - 67

North Bridge GTL REF Volt................. - 67[/color]



[b]DRAM Timing:[/b]

[color=red]Enhance Data transmitting................. - Fast

Enhance Addressing........................ - Fast

T2 Dispatch............................... - Disabled



CAS Latency Time (tCL).................... - 5

RAS# to CAS# Delay (tRCD)................. - 5

RAS# Precharge (tRP)...................... - 5

Precharge delay (tRAS).................... - 15

All Precharge to ACT...................... - Auto 5

REF to ACT Delay (tRFC)................... - Auto 42

Preformance LVL (Read delay).............. - Auto 3



MCH ODT Latencey.......................... - Auto

Write to PRE Delay (tWR).................. - Auto 14

Rank Write to Read (tWTR)................. - Auto 11

ACT to ACT Delay (tRRD)................... - Auto 3

Read to Write Delay (tRDWR)............... - Auto 8

Ranks Write to Write (tWRWR).............. - Auto 

Ranks Read to Read (tRDRD)................ - Auto 

Ranks Write to Read (tWRRD)............... - Auto 

Read CAS# Precharge (tRTP)................ - Auto 3

All PRE to Refresh........................ - Auto 5[/color]



[b]Clock Setting Fine Delay:[/b]

[color=red]Ch1 Clock Crossing Setting................ - More Aggressive

DIMM 1 Clock fine delay................... - Current 44ps

DIMM 2 Clock fine delay................... - Current 445ps

Ch1 Command fine delay.................... - Current 756ps

Ch1 Control fine delay.................... - Current 512ps



Ch2 Clock Crossing Setting................ - More Aggressive

DIMM 3 Clock fine delay................... - Current 44ps

DIMM 4 Clock fine delay................... - Current 512ps

Ch2 Command fine delay.................... - Current 756ps

Ch2 Control fine delay.................... - Current 445ps



Ch1Ch2 CommonClock Setting................ - More Aggressive



Ch1 RDCAS GNT-Chip Delay.................. - Auto

Ch1 WRCAS GNT-Chip Delay.................. - Auto

Ch1 Command to CS Delay................... - Auto



Ch2 RDCAS GNT-Chip Delay.................. - Auto

Ch2 WRCAS GNT-Chip Delay.................. - Auto

Ch2 Command to CS Delay................... - Auto[/color]



[b]Read delay phase adjust:[/b]

[color=red][I]Ch1 Read delay phase(4~0)	3-3-3-3-3[/I]

Channel 1 Phase 0 Pull-In................. - Auto

Channel 1 Phase 1 Pull-In................. - Auto

Channel 1 Phase 2 Pull-In................. - Auto

Channel 1 Phase 3 Pull-In................. - Auto

Channel 1 Phase 4 Pull-In................. - Auto



[I]Ch2 Read delay phase(4~0)	3-3-3-3-3[/I]

Channel 2 Phase 0 Pull-In................. - Auto

Channel 2 Phase 1 Pull-In................. - Auto

Channel 2 Phase 2 Pull-In................. - Auto

Channel 2 Phase 3 Pull-In................. - Auto

Channel 2 Phase 4 Pull-In................. - Auto[/color]

 

 

==========

 

 

Prime95, CPUZ, 3Dmark2001SE, MemSet:

 

ocdbp95pi1.th.jpg

 

3dMark2003:

 

ocdb3d3ev9.jpg

 

3dMark2005:

 

ocdb3d5jg0.jpg

 

3dMark 2006:

 

ocdb3d6am1.jpg

 

Aquamark:

 

ocdbaqmuc1.jpg

 

 

==========

 

Short Description:

250x16 @ 4.0GHz 1.37vcore (BIOS) 1.39V (O/S)

5-5-5-15 1000MHz 1.90vdimm

 

.

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (03/17/2008 BIOS)

 

Intel E8500 (Q746A579)

 

2x1024 OCZ PC9600 FLEX (OCZ2FX12001G)

 

8800 Ultra @ 710/1140, 169.21 Drivers

 

2X36GB Raptor RAID 0 / 250GB Caviar

 

Pioneer DVR 111D

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

 [b]Genie BIOS Settings:[/b]
[color=red]
Genie BIOS Setting:

Exit Setup shutdown....................... - Mode 2
CLOCK VCO divider......................... - Auto
CPU Clock Ratio........................... - 9.5 X
CPU-N2 Ratio.............................. - Disabled
- Target CPU Clock........................ - 4750 MHz
CPU Clock................................. - 500 MHz
Boot Up Clock............................. - Auto
DRAM Speed................................ - 333/800
- Target DRAM Speed....................... - DDR2 1201
PCIE Clock................................ - 100 MHz
PCIE Slot Config.......................... - 1X 1X

CPU Spread Spectrum....................... - Disabled
PCIE Spread Spectrum...................... - Disabled
SATA Spread Spectrum...................... - Disabled


CPU Feature:

Thermal Management Control................ - Enabled
PPM(EIST) Mode............................ - Enabled
Limit CPUID MaxVal........................ - Disabled
C1E Function.............................. - Auto
Execute Disable Bit....................... - Enabled
Virtualization Technology................. - Disabled
Core Multi-Processing..................... - Enabled


Voltage Setting:

CPU VID Control........................... - Auto
CPU VID Special Add....................... - 126.45%
DRAM Voltage Control...................... - 2.27V
SB 1.05V Voltage.......................... - 1.15V
SB Core/CPU PLL Voltage................... - 1.55V
NB Core Voltage........................... - 1.53V
CPU VTT Voltage........................... - 1.17V
Vcore Droop Control....................... - Enabled
Clockgen Voltage Control.................. - 3.45V
GTL+ Buffers Strenght..................... - Strong
Host Slew Rate............................ - Strong
GTL REF Voltage Control................... - Enabled
CPU GTL 1/3  REF Volt..................... - 68
CPU GTL 0/2  REF Volt..................... - 67
North Bridge GTL REF Volt................. - 69


DRAM Timing:

Enhance Data transmitting................. - Fast
Enhance Addressing........................ - Fast
T2 Dispatch............................... - Auto

CAS Latency Time (tCL).................... - 5
RAS# to CAS# Delay (tRCD)................. - 5
RAS# Precharge (tRP)...................... - 5
Precharge delay (tRAS).................... - 15
All Precharge to ACT...................... - 5
REF to ACT Delay (tRFC)................... - 33
Preformance LVL (Read delay).............. - 8

MCH ODT Latencey.......................... - AUTO
Write to PRE Delay (tWR).................. - 13
Rank Write to Read (tWTR)................. - 11
ACT to ACT Delay (tRRD)................... - 3
Read to Write Delay (tRDWR)............... - 8
Ranks Write to Write (tWRWR).............. - AUTO
Ranks Read to Read (tRDRD)................ - AUTO
Ranks Write to Read (tWRRD)............... - AUTO
Read CAS# Precharge (tRTP)................ - 3
All PRE to Refresh........................ - 5


Clock Setting Fine Delay:

Ch1 Clock Crossing Setting................ - More Aggressive
DIMM 1 Clock fine delay................... - Current[44]
DIMM 2 Clock fine delay................... - Current[445]
Ch1 Command fine delay.................... - Current[756]
Ch1 Control fine delay.................... - Current[512]

Ch2 Clock Crossing Setting................ - More Aggressive
DIMM 3 Clock fine delay................... - Current[44]
DIMM 4 Clock fine delay................... - Current[512]
Ch2 Command fine delay.................... - Current[756]
Ch2 Control fine delay.................... - Current[445]

Ch1Ch2 CommonClock Setting................ - More Aggressive

Ch1 RDCAS GNT-Chip Delay.................. - Auto
Ch1 WRCAS GNT-Chip Delay.................. - Auto
Ch1 Command to CS Delay................... - Auto

Ch2 RDCAS GNT-Chip Delay.................. - Auto
Ch2 WRCAS GNT-Chip Delay.................. - Auto
Ch2 Command to CS Delay................... - Auto


Read delay phase adjust:

Channel 1 Phase 0 Pull-In................. - Enabled
Channel 1 Phase 1 Pull-In................. - Enabled
Channel 1 Phase 2 Pull-In................. - Enabled
Channel 1 Phase 3 Pull-In................. - Enabled
Channel 1 Phase 4 Pull-In................. - Enabled

Channel 2 Phase 0 Pull-In................. - Enabled
Channel 2 Phase 1 Pull-In................. - Enabled
Channel 2 Phase 2 Pull-In................. - Enabled
Channel 2 Phase 3 Pull-In................. - Enabled
Channel 2 Phase 4 Pull-In................. - Enabled
[/color]

 

 

==========

 

 

Orthos:

 

normal_Orthos.JPG

 

 

3dMark2001:

 

normal_3d01.JPG

 

 

3dMark2003:

 

normal_3d03~1.JPG

 

 

 

3dMark 2005:

 

normal_3d05~1.JPG

 

 

3dMark 06:

 

normal_3d06~1.JPG

 

 

 

 

Aquamark:

 

normal_Aquamark.JPG

 

 

 

==========

 

 

 

short description:

500x9.5 @ 4750Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

EVGA 680i A1 (P32 BIOS)

 

Intel Q6600 (SLACR/G0, 1.325V VID)

 

2x1024 OCZ PC9200 FLEX (OCZ2FX11502GK)

 

2x 8800 GTS (SLI) @ 702/1674/1053, 177.35 Drivers

 

4x Hitachi T7K500 250GB SATA2 (Highpoint RAID-10)

2x Hitachi T7K500 250GB SATA2 (nVidia RAID-0)

2x Samsung T166 500GB SATA2

2x Hitachi T7K250 250GB SATA2

Seagate Freeagent 250GB USB2

 

NEC ND3500AG DVDRW

 

PCP&C Silencer 750

 

Water:

Loop1: Laing D5 Vario (Pump) -> Swiftech MCR220 (Rad) -> DTek Fuzion (CPU block) -> DD 680i Maze4 (NB block) -> ((Pump))

Loop2: Swiftech MCP655 (Pump) -> EK 680i MOSFET Type1 -> EK 680i MOSFET Type2 -> Thermochill PA120.3 (Rad) -> (split: OCZ FlexXLC (RAMblock) -> OCZ FlexXLC (RAMblock)) -> DD NV88GTS (GPU full block) -> DD NV88GTS (GPU full block) -> (Pump)

 

 

 

 

 

 

 

 

==========

 

Advanced Chipset Features:

System Clocks:

 CPU Multi................................. - 8x
 PCIEx16_1, MHz............................ - 100
 PCIEx16_3, MHz............................ - 100
 PCIEx16_2, MHz............................ - 100
 SPP<->MCP, MHz............................ - 200
 SPP<->MCP, MHz............................ - 200

 SPP->MCP.................................. - 5x
 SPP<-MCP.................................. - 5x

 PCIE Spread Spectrum...................... - Disabled



FSB & Memory Configuration:

 FSB - Memory Clock Mode.................. - Linked
 FSB - Memory Ratio....................... - Sync Mode
 FSB (QDR), MHz........................... - 1800

 Memory Timing Setting:

Memory Timing Setting.................. - Expert
tCL.................................... - 4
tRCD................................... - 3
tRP.................................... - 3
tRAS................................... - 10
CMD.................................... - 2T

tRRD................................... - 3
tRC.................................... - 16
tWR.................................... - 5
tWTR................................... - 9
tREF................................... - 7.8us


CPU Configuration:

 Limit CPU ID MaxVal...................... - Disabled
 Intel Speedstep.......................... - Disabled
PPM Mode............................... - Native Mode
 CPU Thermal Control...................... - Disabled
 C1E Enhanced Halt State.................. - Disabled
 Execute Disable Bit...................... - Enabled
 Virtualisation Technology................ - Enabled


System Voltages:

 CPU Core................................. - 1.56875
 CPU FSB.................................. - 1.5
 Memory................................... - 2.100
 SPP...................................... - 1.50
 MCP...................................... - 1.600
 SPP<->MCP................................ - 1.25


System BIOS Cacheable...................... - Disabled
HPET Function.............................. - Enabled
NVidia GPU Ex.............................. - Enabled

 

 

 

==========

 

Everest:

 

everest8x450450433102tmu6.th.jpg

 

 

Prime95 v25: 24 hours

 

p953600mhz24hours450433jf2.th.png

 

 

3dMark2001: 69,562

 

3dm0169562ul7.th.png

 

 

3dMark2003: 67,763

 

3dm0367763qb7.th.png

 

 

3dMark 2005: 24,092

 

3dm0524092on7.th.png

 

 

3dMark 06: 18,813

 

3dm0618813ca4.th.png

 

 

Aquamark: 197,309

 

aq3197309kh6.th.png

 

 

 

==========

 

 

 

short description:

8x450 = 3600Mhz, 1.56875V, DTek Fuzion

450MHz, 4-3-3-10-2T, 2.1V, Flex(water)

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (05/02/2008 BIOS)

 

Intel E8600 (Q822A435)

 

2x1024 OCZ PC9600 FLEX (OCZ2FX12001G)

 

8800 Ultra @ 710/1140, 169.21 Drivers

 

2X36GB Raptor RAID 0 / 250GB Caviar

 

Pioneer DVR 111D

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
Genie BIOS Setting:

Exit Setup shutdown....................... - Mode 2
CLOCK VCO divider......................... - Auto
CPU Clock Ratio........................... - 10.0 X
CPU-N2 Ratio.............................. - Disabled
- Target CPU Clock........................ - 5100 MHz
CPU Clock................................. - 510 MHz
Boot Up Clock............................. - Auto
DRAM Speed................................ - 333/800
- Target DRAM Speed....................... - DDR2 1224
PCIE Clock................................ - 100 MHz
PCIE Slot Config.......................... - 1X 1X

CPU Spread Spectrum....................... - Disabled
PCIE Spread Spectrum...................... - Disabled
SATA Spread Spectrum...................... - Disabled


CPU Feature:

Thermal Management Control................ - Enabled
PPM(EIST) Mode............................ - Enabled
Limit CPUID MaxVal........................ - Disabled
C1E Function.............................. - Auto
Execute Disable Bit....................... - Enabled
Virtualization Technology................. - Enabled
Core Multi-Processing..................... - Enabled


Voltage Setting:

CPU VID Control........................... - Auto
CPU VID Special Add....................... - 124.56%
DRAM Voltage Control...................... - 2.27V
SB 1.05V Voltage.......................... - 1.15V
SB Core/CPU PLL Voltage................... - 1.55V
NB Core Voltage........................... - 1.53V
CPU VTT Voltage........................... - 1.15V
Vcore Droop Control....................... - Enabled
Clockgen Voltage Control.................. - 3.45V
GTL+ Buffers Strenght..................... - Strong
Host Slew Rate............................ - Strong
GTL REF Voltage Control................... - Enabled
CPU GTL 1/3  REF Volt..................... - 68
CPU GTL 0/2  REF Volt..................... - 67
North Bridge GTL REF Volt................. - 67


DRAM Timing:

Enhance Data transmitting................. - Fast
Enhance Addressing........................ - Fast
T2 Dispatch............................... - Auto

CAS Latency Time (tCL).................... - 5
RAS# to CAS# Delay (tRCD)................. - 5
RAS# Precharge (tRP)...................... - 5
Precharge delay (tRAS).................... - 15
All Precharge to ACT...................... - 5
REF to ACT Delay (tRFC)................... - 33
Preformance LVL (Read delay).............. - 8

MCH ODT Latencey.......................... - AUTO
Write to PRE Delay (tWR).................. - 13
Rank Write to Read (tWTR)................. - 11
ACT to ACT Delay (tRRD)................... - 3
Read to Write Delay (tRDWR)............... - 8
Ranks Write to Write (tWRWR).............. - AUTO
Ranks Read to Read (tRDRD)................ - AUTO
Ranks Write to Read (tWRRD)............... - AUTO
Read CAS# Precharge (tRTP)................ - 3
All PRE to Refresh........................ - 5


Clock Setting Fine Delay:

Ch1 Clock Crossing Setting................ - More Aggressive
DIMM 1 Clock fine delay................... - Current[89]
DIMM 2 Clock fine delay................... - Current[489]
Ch1 Command fine delay.................... - Current[801]
Ch1 Control fine delay.................... - Current[545]

Ch2 Clock Crossing Setting................ - More Aggressive
DIMM 3 Clock fine delay................... - Current[89]
DIMM 4 Clock fine delay................... - Current[545]
Ch2 Command fine delay.................... - Current[801]
Ch2 Control fine delay.................... - Current[489]

Ch1Ch2 CommonClock Setting................ - More Aggressive

Ch1 RDCAS GNT-Chip Delay.................. - Auto
Ch1 WRCAS GNT-Chip Delay.................. - Auto
Ch1 Command to CS Delay................... - Auto

Ch2 RDCAS GNT-Chip Delay.................. - Auto
Ch2 WRCAS GNT-Chip Delay.................. - Auto
Ch2 Command to CS Delay................... - Auto


Read delay phase adjust:

Channel 1 Phase 0 Pull-In................. - Enabled
Channel 1 Phase 1 Pull-In................. - Enabled
Channel 1 Phase 2 Pull-In................. - Enabled
Channel 1 Phase 3 Pull-In................. - Enabled
Channel 1 Phase 4 Pull-In................. - Enabled

Channel 2 Phase 0 Pull-In................. - Enabled
Channel 2 Phase 1 Pull-In................. - Enabled
Channel 2 Phase 2 Pull-In................. - Enabled
Channel 2 Phase 3 Pull-In................. - Enabled
Channel 2 Phase 4 Pull-In................. - Enabled
[/color]

 

 

==========

 

 

Orthos/3d01

sltxsh_th.jpg

 

 

3dMark2003:

2cro7mc_th.jpg

 

 

 

3dMark 2005:

315epu9_th.jpg

 

 

3dMark 06:

dcwkrc_th.jpg

 

 

 

==========

 

 

 

short description:

510x10 @ 5100Mhz, Mach2 GT cooling

Edited by kitfit1

Share this post


Link to post
Share on other sites

DFI LP UT P35-T2R (05/02/2008 BIOS)

 

Intel E8600 (Q822A435)

 

2x1024 OCZ PC9600 FLEX (OCZ2FX12001G)

 

ATI 4870x2 @ 850/950, Cat 8.9

 

2X36GB Raptor RAID 0 / 250GB Caviar

 

Pioneer DVR 111D

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

 

 

 

 

 

 

 

 

 

 

==========

 

[b]Genie BIOS Settings:[/b]
[color=red]
Genie BIOS Setting:

Exit Setup shutdown....................... - Mode 2
CLOCK VCO divider......................... - Auto
CPU Clock Ratio........................... - 10.0 X
CPU-N2 Ratio.............................. - Disabled
- Target CPU Clock........................ - 5100 MHz
CPU Clock................................. - 510 MHz
Boot Up Clock............................. - Auto
DRAM Speed................................ - 333/800
- Target DRAM Speed....................... - DDR2 1224
PCIE Clock................................ - 100 MHz
PCIE Slot Config.......................... - 1X 1X

CPU Spread Spectrum....................... - Disabled
PCIE Spread Spectrum...................... - Disabled
SATA Spread Spectrum...................... - Disabled


CPU Feature:

Thermal Management Control................ - Enabled
PPM(EIST) Mode............................ - Enabled
Limit CPUID MaxVal........................ - Disabled
C1E Function.............................. - Auto
Execute Disable Bit....................... - Enabled
Virtualization Technology................. - DISABLED
Core Multi-Processing..................... - Enabled


Voltage Setting:

CPU VID Control........................... - Auto
CPU VID Special Add....................... - 124.56%
DRAM Voltage Control...................... - 2.27V
SB 1.05V Voltage.......................... - 1.15V
SB Core/CPU PLL Voltage................... - 1.55V
NB Core Voltage........................... - 1.53V
CPU VTT Voltage........................... - 1.15V
Vcore Droop Control....................... - Enabled
Clockgen Voltage Control.................. - 3.45V
GTL+ Buffers Strenght..................... - Strong
Host Slew Rate............................ - Strong
GTL REF Voltage Control................... - Enabled
CPU GTL 1/3  REF Volt..................... - 68
CPU GTL 0/2  REF Volt..................... - 67
North Bridge GTL REF Volt................. - 67


DRAM Timing:

Enhance Data transmitting................. - Fast
Enhance Addressing........................ - Fast
T2 Dispatch............................... - Auto

CAS Latency Time (tCL).................... - 5
RAS# to CAS# Delay (tRCD)................. - 5
RAS# Precharge (tRP)...................... - 5
Precharge delay (tRAS).................... - 15
All Precharge to ACT...................... - 5
REF to ACT Delay (tRFC)................... - 33
Preformance LVL (Read delay).............. - 8

MCH ODT Latencey.......................... - AUTO
Write to PRE Delay (tWR).................. - 13
Rank Write to Read (tWTR)................. - 11
ACT to ACT Delay (tRRD)................... - 3
Read to Write Delay (tRDWR)............... - 8
Ranks Write to Write (tWRWR).............. - AUTO
Ranks Read to Read (tRDRD)................ - AUTO
Ranks Write to Read (tWRRD)............... - AUTO
Read CAS# Precharge (tRTP)................ - 3
All PRE to Refresh........................ - 5


Clock Setting Fine Delay:

Ch1 Clock Crossing Setting................ - More Aggressive
DIMM 1 Clock fine delay................... - Current[89]
DIMM 2 Clock fine delay................... - Current[489]
Ch1 Command fine delay.................... - Current[801]
Ch1 Control fine delay.................... - Current[545]

Ch2 Clock Crossing Setting................ - More Aggressive
DIMM 3 Clock fine delay................... - Current[89]
DIMM 4 Clock fine delay................... - Current[545]
Ch2 Command fine delay.................... - Current[801]
Ch2 Control fine delay.................... - Current[489]

Ch1Ch2 CommonClock Setting................ - More Aggressive

Ch1 RDCAS GNT-Chip Delay.................. - Auto
Ch1 WRCAS GNT-Chip Delay.................. - Auto
Ch1 Command to CS Delay................... - Auto

Ch2 RDCAS GNT-Chip Delay.................. - Auto
Ch2 WRCAS GNT-Chip Delay.................. - Auto
Ch2 Command to CS Delay................... - Auto


Read delay phase adjust:

Channel 1 Phase 0 Pull-In................. - Enabled
Channel 1 Phase 1 Pull-In................. - Enabled
Channel 1 Phase 2 Pull-In................. - Enabled
Channel 1 Phase 3 Pull-In................. - Enabled
Channel 1 Phase 4 Pull-In................. - Enabled

Channel 2 Phase 0 Pull-In................. - Enabled
Channel 2 Phase 1 Pull-In................. - Enabled
Channel 2 Phase 2 Pull-In................. - Enabled
Channel 2 Phase 3 Pull-In................. - Enabled
Channel 2 Phase 4 Pull-In................. - Enabled
[/color]

 

 

==========

 

 

Orthos/3d01:

 

normal_Orthos-3d01~0.JPG

 

 

3dMark2003:

normal_3d03~2.JPG

 

 

 

3dMark 2005:

normal_3d05~2.JPG

 

 

3dMark 06:

normal_3d06~2.JPG

 

 

 

==========

 

 

 

short description:

510x10 @ 5100Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

DFI LP UT P45-T2RS (12/12/2008 BIOS)

 

Intel E8600 (Q826A457)

 

4x1024 OCZ PC9600 FLEX (OCZ2FX12001G)

 

ATI 4870x2, Cat 8.12

 

2X36GB Raptor RAID 0 / 250GB Caviar

 

Pioneer DVR 111D

 

Pcp&P Turbocool 1Kw

 

Mach2 GT/Chilly1/Desuperheater

 

Vista Ultimate 64

 

 

 

 

 

 

 

 

 

 

[b]Genie BIOS Settings:[/b]
[color=red]

Exit Setup shutdown........................... - Mode 2
Shutdown after AC loss........................ - Enabled
AC Shutdown free.............................. - Enabled
O.C. Fail retry Counter....................... - 1
O.C. Fail CMOS Reload......................... - Disabled
CPU Clock Ratio............................... - 8.5x
CPU N/2 Ratio................................. - Enabled
Target CPU Clock.............................. - 4791 MHz
CPU Clock..................................... - 563 MHz
Boot Up Clock................................. - Auto
CPU Clock Amplitude........................... - 800mV
CPU Clock0 Skew............................... - 100ps
CPU Clock1 Skew............................... -   0ps
DRAM Speed.................................... - 400/800
Target DRAM Speed............................. - DDR2 1126
PCIE Clock.................................... - 100 MHz

CPU Spread Spectrum........................... - Disabled
PCIE Spread Spectrum.......................... - Disabled


CPU Feature

Thermal Management Control.................... - Enabled
PPM (EIST)Mode................................ - Disabled
Limit CPUID MaxVal............................ - Disabled
C1E Function.................................. - Enabled
Execute Disable Bit........................... - Enabled
Virtualization Technology..................... - Enabled
Core Multi-Processing......................... - Enabled


DRAM Timing

Enhance Data Transmitting..................... - Fast
Enhanced Addressing........................... - Fast
T2 Dispatch................................... - Auto

Flex Memory Mode.............................. - Auto
CAS Latency Time (tCL)........................ - 5
RAS# to CAS# Delay (tRCD)..................... - 5
RAS# Precharge (tRP).......................... - 5
Precharge Delay (tRAS)........................ - 15
All Precharge to ACT.......................... - Auto
REF to ACT Delay (tRFC)....................... - 43
Performance LVL (Read Delay).................. - Auto
Write to PRE Delay (tWR)...................... - Auto
Rank Write to Read (tWTR)..................... - Auto
ACT to ACT Delay (tRRD)....................... - Auto
Read to Write Delay (tRDWR)................... - Auto
Ranks Write to Write (tWRWR).................. - Auto
Ranks Write to Read (tWRRD)................... - Auto
Read CAS# Precharge (tRTP).................... - Auto
All PRE to Refresh............................ - Auto



Clock Setting Fine Delay

DLL and RCOMP Settings........................ - By Menu
CH1 DRAM Default Skew......................... - Model 3
CH2 DRAM Default Skew......................... - Model 3
RCOMP Setting................................. - Model 1

Fine Delay Step Degree........................ - 70ps

Ch1 Clock Crossing Setting.................... - Auto
DIMM 1 Clock fine delay....................... - current 1924ps
DIMM 2 Clock fine delay....................... - current 1924ps
Ch1 Control0 fine delay....................... - current  194ps
Ch1 Control1 fine delay....................... - current  194ps
Ch1 Control2 fine delay....................... - current  110ps
Ch1 Control3 fine delay....................... - current   96ps
Ch1 Command fine delay........................ - current  194ps

Ch2 Clock Crossing Setting.................... - Auto
DIMM 3 Clock fine delay....................... - current 1924ps
DIMM 4 Clock fine delay....................... - current 1882ps
Ch2 Control0 fine delay....................... - current  152ps
Ch2 Control1 fine delay....................... - current  152ps
Ch2 Control2 fine delay....................... - current   70ps
Ch2 Control3 fine delay....................... - current   56ps
Ch2 Command fine delay........................ - current  152ps

Ch1Ch2 Common Clock Setting................... - Auto

Ch1 RDCAS GNT-Chip Delay...................... - Auto
Ch1 WRCAS GNT-Chip Delay...................... - Auto
Ch1 Command to CS Delay....................... - Auto

Ch2 RDCAS GNT-Chip Delay...................... - Auto
Ch2 WRCAS GNT-Chip Delay...................... - Auto
Ch2 Command to CS Delay....................... - Auto


Read Delay Phase Adjust

Ch1 Read delay phase (4~0)  10- 10- 10- 10- 10
Channel 1 Phase 0 Pull-In..................... - Auto
Channel 1 Phase 1 Pull-In..................... - Auto
Channel 1 Phase 2 Pull-In..................... - Auto
Channel 1 Phase 3 Pull-In..................... - Auto
Channel 1 Phase 4 Pull-In..................... - Auto


Ch2 Read delay phase (4~0)  10- 10- 10- 10- 10
Channel 2 Phase 0 Pull-In..................... - Auto
Channel 2 Phase 1 Pull-In..................... - Auto
Channel 2 Phase 2 Pull-In..................... - Auto
Channel 2 Phase 3 Pull-In..................... - Auto
Channel 2 Phase 4 Pull-In..................... - Auto



Voltage Setting

CPU VID Control............................... - Auto 1.245
CPU Special Add Limit......................... - Disabled
CPU Special Add............................... - 123.85%
DRAM Voltage Control.......................... - 2.03v
SB Core/CPU PLL Voltage....................... - 1.55V
NB Core Voltage............................... - 1.408v
CPU VTT Voltage............................... - 1.2v
Vcore Droop Control........................... - Enabled
Clockgen Voltage Control...................... - 3.6V
CPU GTL 0 REF Volt............................ - 0.6175
CPU GTL 2 Ref Volt............................ - 0.6175
CPU GTL 1 Ref Volt............................ - 0.6175
CPU GTL 3 REF Volt............................ - 0.6175
NB  GTL 0 Ref Volt............................ - 0.6175
NB  GTL 1 Ref Volt............................ - 0.6175
FSB Vref...................................... - Auto

[/color]

 

 

==========

 

 

Orthos:

 

sg1y1h_th.jpg

 

 

3dMark2001:

 

29w05ra_th.jpg

 

 

3dMark2003:

 

qqsdci_th.jpg

 

 

 

3dMark 2005:

 

2ytwmt2_th.jpg

 

 

3dMark 2006:

 

craps34_th.jpg

 

 

 

 

 

 

 

==========

 

 

 

short description:

563x8.5 @ 4791Mhz, Mach2 GT cooling

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×