jamesbond Posted June 18, 2006 Posted June 18, 2006 thanks m8 but it is of Share this post Link to post Share on other sites More sharing options...
AbsoLoot Posted June 18, 2006 Posted June 18, 2006 Remove your video drivers, reboot. Remove your chipset drivers, reboot. Go though found new hardware for all the mobo things it finds, just with the windows drivers, cancelling found new hardware for video. Reboot again. Reinstall chipset drivers, reboot. Install video drivers, reboot. Test 3D. 0 filling wouldn't cause the PC to stutter, but the reason you wanted to run a low-level in the first place might. What was wrong with the drive before? Just paranoid about your porn? Share this post Link to post Share on other sites More sharing options...
jamesbond Posted June 18, 2006 Posted June 18, 2006 what porn Share this post Link to post Share on other sites More sharing options...
jamesbond Posted June 18, 2006 Posted June 18, 2006 do you think the power surply will help thanks alot. Share this post Link to post Share on other sites More sharing options...
jamesbond Posted June 18, 2006 Posted June 18, 2006 1 other think when watching movies on widows media player it stutters for about 3 seconds what could be makeing it do that thanks.it does it about every 1 min Share this post Link to post Share on other sites More sharing options...
chapas Posted June 19, 2006 Posted June 19, 2006 Your video card may be sucking too much power. Try connecting your video card to one rail and the rest of the hardware to the other. By rails I mean the molex cables going out of the PSU. I had all my hardware and the gpu on one rail and the computer shut off . Try nforce drivers version 5.10 too, they're the most stable I know of. Share this post Link to post Share on other sites More sharing options...
Branjo Posted June 20, 2006 Posted June 20, 2006 is your pagfile big enough ? Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 20, 2006 Posted June 20, 2006 hi just want to know what this stuff should be on.agp aperture size TRY 128 AND THEN 256 agp 3.0 speed auto or 4x or 8x AUTO agp fast write enabled/disabled DISABLE agp sideband address auto/disabled AUTO cpu thermal-throttling 50.00% or disabled or other % DISABLE special i/0 for pci card DONT MESS WITH systeam bios cacheable disabled/enabled TRY BOTH WAYS on board 1394 control DISABLE IF YOU'RE NOT USING ANY 1394 DEVICES cpu core voltage 1.40v chip set voltage 1.59v agp slot voltage 1.52v dram 2.5 voltage 2.61v CHANGE DRAM VOLTAGE TO 2.7v plz help me is the voltage right is there any think to change thanks. Recommendations in bold. What power supply are you currently using? Did you MemTest and Prime95 Torture test your rig to ensure that everything was stable to begin with? Share this post Link to post Share on other sites More sharing options...
jamesbond Posted June 20, 2006 Posted June 20, 2006 i have a cheap ebuyer power surply i have no paging on it was on 2046 what should it be on.will my power surply help thanks alot. Share this post Link to post Share on other sites More sharing options...
jamesbond Posted June 20, 2006 Posted June 20, 2006 got my power surply still the same.when i go to my internet favorites if i drag my mouse down over all my favorites a black box comes out under the wrighting could that be my cpu thanks. Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 20, 2006 Posted June 20, 2006 jamesbond, you really are running us in circles here. it is hard to help trouble shoot your problem if you keep jumping from symptom to symptom. 1. you say you got ur power supply, what does that mean? you bought a new one? if so what brand, what total output and what amperage on your voltage rails? 2. you've failed to answer my question concerning whether or not your rig was memtest and prime95 stable. once you've answered these questions we can move onto the next step. Share this post Link to post Share on other sites More sharing options...
jamesbond Posted June 21, 2006 Posted June 21, 2006 i got a new power surply to see if it would help but it did not this is the 1 i got. http://ebuyer.com/UK/product/90609/rb/19960320841 what test should i do on prime test and mem test plz help thanks alot. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now