a64maxedout Posted January 29, 2006 Posted January 29, 2006 Hello all, Iam having some trouble overclocking (or even making it stable) my system. Has any one tested out osme settings revalent to the specs i have listed in my sig??? need help badly cause every test i try in prime i get errors on the first test. Thanks in advance, John P.S my mushkin ram are in the yellow slots. Share this post Link to post Share on other sites More sharing options...
a64maxedout Posted January 29, 2006 Posted January 29, 2006 anyone? Share this post Link to post Share on other sites More sharing options...
otogrim Posted January 29, 2006 Posted January 29, 2006 First of all, have you read through the guide? Also you might want to move your ram to the orange slots. Share this post Link to post Share on other sites More sharing options...
sound-tekkie Posted January 29, 2006 Posted January 29, 2006 what bios settings have you changed? Share this post Link to post Share on other sites More sharing options...
edjahman Posted January 29, 2006 Posted January 29, 2006 Nice quote, otogrim. The Elliot one. --EJM Share this post Link to post Share on other sites More sharing options...
ah_khoo Posted January 29, 2006 Posted January 29, 2006 do provide full setting that you've set like: htt multi ldt vcore vdimm vldt vchipset divider alpha settings of ram temperatures the instability can be caused by anyone (or more) listed above... Share this post Link to post Share on other sites More sharing options...
EdLSmith Posted January 29, 2006 Posted January 29, 2006 BH5 Ram in yellow slots is good. Yellow handles the higher Vdimm best. My BH5 run at 3.5. I assume yours is above 3.0. For protection of your cpu, increase your Vcore to at least 1.40. Do not leave it on auto or at stock. This is because of a high Vdimm. We were informed of this by reps from other sites who brought this to our attention from AMD. The statement was that a high Vdimm with a stock Vcore can potentally kill a 90 nano cpu. If you are looking for dram settings, visit the SSDB and OCDB, look for RAM same or simular to your own. Good luck. Share this post Link to post Share on other sites More sharing options...
a64maxedout Posted January 29, 2006 Posted January 29, 2006 okay srry about not listing the details but here they are (ref to specs on my sig) BIOS Ver. (just updated) 704-BTA FSB:200 LDT/FSB: x5.0 CPU/FSB: x10.0 Vid startup: startup CPU Vid: 1.525 Vid Special: 113% LDT volts: 1.4 SPU set volt: 1.7 DRAM volt:3.4 DRAM settings: RAM multi 180 CPC Enabled TCL 2 TRAS 2 TRP 5 TRC 2 TRFC 7 TRRD 15 TWR 2 TWTR 2 TRWT 1 TREF 2 3072 TWCL auto BANK INTR Enabled SKEW VAL 0 DRAM D STRE normal 3 DRAM D D STRE 1 DRAM RESPONSE 8 MAX ASYNC 5 READ PRE fast IDLE D COUNTER D R/W QUE 5 BYPASS 16 Share this post Link to post Share on other sites More sharing options...
a64maxedout Posted January 29, 2006 Posted January 29, 2006 want to overlcock the cpu a bit but everything i tried either fails Prime or crashes the comp Share this post Link to post Share on other sites More sharing options...
a64maxedout Posted January 29, 2006 Posted January 29, 2006 anyone? Share this post Link to post Share on other sites More sharing options...
a64maxedout Posted January 29, 2006 Posted January 29, 2006 bump Share this post Link to post Share on other sites More sharing options...
faheyd Posted January 29, 2006 Posted January 29, 2006 bump Ya, Did you read the guides on overclocking. I would if I were you. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now