Jump to content


Photo
- - - - -

Kingston D3208DW3T-5U BH-5 ??


  • Please log in to reply
44 replies to this topic

#1 ACE 256

ACE 256

    Member

  • Members
  • PipPip
  • 56 posts

Posted 26 January 2006 - 07:05 PM

I just got 2 512Mb sticks of remarked kingston ram ( D3208DW3T-5U ) Iv read that D328DW-5 is BH-5 Here Did i get lucky ?? Did I get 2 BH-5 sticks? Or is it just normal ram ? It does like tight timings( 2 2 2 [email protected] 440, 3 4 4 11 is stock @ 400 i believe ) and more voltage ( thow My K7N2 Delta L only can put out 2.7 thow :( ) If its not BH-5 what do i have ?? I orderd a DDR booster ;) I might not be able to use it but i thought it might come in handy one day :nod:..........

#2 ACE 256

ACE 256

    Member

  • Members
  • PipPip
  • 56 posts

Posted 13 February 2006 - 03:37 PM

Any one ??? I have them running DDR 500 2 2 2 11 now @ 3.3V.....

#3 Tech-Noir

Tech-Noir

    Member

  • Members
  • PipPip
  • 117 posts

Posted 14 February 2006 - 02:22 AM

I would guess they are BH-5 with those settings. The fact that they have "5U" rather than "6" should point to BH-5 as that site says aswell. :)

#4 Markus_d

Markus_d

    Member

  • Members
  • PipPip
  • 115 posts

Posted 14 February 2006 - 03:48 AM

BH-5 doesnt boot with CL3

you can always check the chips, try finding a pic on the web to compare with.

#5 ACE 256

ACE 256

    Member

  • Members
  • PipPip
  • 56 posts

Posted 14 February 2006 - 01:32 PM

BH-5 doesnt boot with CL3

you can always check the chips, try finding a pic on the web to compare with.

Well thare stock at DDR400 3 3 3 8 so thay do run Cas3 ...Maybe thare BH-6 or CH-5 ?? Im running 2 2 0 11 now BTW ( Priming for 4 hours now, no errors so far ) ..odd how CPUz and Everest wont show a Precharg value under 1...
I got another DFI infinity NF2 BTW....

#6 Markus_d

Markus_d

    Member

  • Members
  • PipPip
  • 115 posts

Posted 14 February 2006 - 02:06 PM

http://www.vrforums....ead.php?t=47615

some pics ;)

#7 medianOCer

medianOCer

    Geek

  • Members
  • PipPipPip
  • 714 posts

Posted 14 February 2006 - 02:11 PM

D3208DW3T-5U... Are there any other parts numbers on the chips than just those?

How about if you go to the SPD tab in CPU-Z, do you get any reporting of the week
and year they were made and/or other info? You could also check the SPD area
under Motherboard in Everest. There may be other progs you could use too.

#8 ACE 256

ACE 256

    Member

  • Members
  • PipPip
  • 56 posts

Posted 14 February 2006 - 05:13 PM

D3208DW3T-5U... Are there any other parts numbers on the chips than just those?

How about if you go to the SPD tab in CPU-Z, do you get any reporting of the week
and year they were made and/or other info? You could also check the SPD area
under Motherboard in Everest. There may be other progs you could use too.

I think thats all thay have on them ..Ill pull them out later and look... 2 2 0 11 is unstable prime failed ~ 5, hours priming 2 2 1 11 now lol....SPD tab in CPU Z....

#9 ACE 256

ACE 256

    Member

  • Members
  • PipPip
  • 56 posts

Posted 14 February 2006 - 05:40 PM

Ok here is the exact Chip layout and text......

#10 medianOCer

medianOCer

    Geek

  • Members
  • PipPipPip
  • 714 posts

Posted 14 February 2006 - 05:43 PM

Thanks for the jpg(s).

Interesting results with the Alphas.

Does a lower value on the slew rates seem to be weaker
and a higher value stronger with those, or vice versa?
Curious what you're take on that is.

Does seem like BH-5, or similar types of RAM. Of course
you hardly need me to tell you that, heh.

I wonder if anyone at Kingston would give you the low-
down on the RAM chips if you gave someone the numbers
off of one of the chips?

#11 ACE 256

ACE 256

    Member

  • Members
  • PipPip
  • 56 posts

Posted 14 February 2006 - 05:57 PM

Thanks for the jpg.

How much Vdimm you need to run the RAM at 250/500?

Interesting results with the Alphas.

Does a lower value on the slew rates seem to be weaker
and a higher value stronger with those, or vice versa?
Curious what you're take on that is.


Drive strengths: I gain stability buy using higher values up to 9, my theory is that above 9 the "drive" overdrives or distorts similar to how a stereo distorts when the volume is to hi.

Slews: 4 seems to be the best spot for me, thow i havent played with it mutch. It seems that changes here have little effect, thow lower #s seems more stable and higher #s seems faster but less stable.

I havent played to mutch with the voltage but 3V isent enough to run 2 2 2 11 @ 500 i havent tryed 3.1 or 3.2.

So far DDR500 2 2 2 11, CPC off, Alphas 0 0 3 3 2 2 3, Drives 9, Slews 4, at 3.3V is 100% stable for 24 Hours in memtest

#12 medianOCer

medianOCer

    Geek

  • Members
  • PipPipPip
  • 714 posts

Posted 14 February 2006 - 09:09 PM

Thanks for sharing what you've found.

Here's some settings that I've run before
and with 3x 256MB BH-5:
233MHz-x10-66MHz-1:1, 1.7v-1.6v-1.7v-3.1v
E-A-E, 9-2-2-2-2.0, 9-12, 2-2-4-3-2-2-3
3-10-3-10-3-10, E-E-F-E, E-E-256MB
APIC enabled

Do you have a copy of the S&M utility, which is great for
testing RAM, CPU and possibly PSUs in Windows? I've
found it's excellent for detecting errors and issues much
quicker than many other methods of testing for stability
within an OS environment.

Of course there are other things I run also, but I usually
start out with S&M first and then move on to other things.

Memtest is good to run from a non-OS environment, but
it will often not reveal errors that can be found when
running in Windows. You might already be aware of that,
sorry if that's the case. I'm hardly trying to speak down
to you.

If you don't have a copy of it yet and are interested,
here's a link you can download it from -
http://www.benchmark...ick.php?fid=301