SPHERE Posted January 11, 2006 Posted January 11, 2006 hey guys i got a little prob here and im shure im not alone my bios keeps turning the speed of my fan down and there is nothing i can do about it can one of you bios dudes put a disable option for the automatic fan control in the bios cause im shure there are plenty of people out there with -25c temps that would love to have their fans running at a full 12v thanks Share this post Link to post Share on other sites More sharing options...
Gipse Posted January 11, 2006 Posted January 11, 2006 Hi, it is not recommended to use the motherboard for fans... Connect them directly to your PSU or a fan controller. Gipse Share this post Link to post Share on other sites More sharing options...
robo989 Posted January 11, 2006 Posted January 11, 2006 True, but the chipset fan is a little annoying since my chipset hangs around the 25c mark and I can constantly hear it zipping up and down in speed. Share this post Link to post Share on other sites More sharing options...
steelballzz Posted January 12, 2006 Posted January 12, 2006 True, but the chipset fan is a little annoying since my chipset hangs around the 25c mark and I can constantly hear it zipping up and down in speed. ya i know what u mean try speedfan and then in the "INFO" use the "get config" button and after that u will be able to control your fans at least i do Share this post Link to post Share on other sites More sharing options...
soundx98 Posted January 12, 2006 Posted January 12, 2006 Actually Tmod is working on something along these lines for me. I PM'd him the following yesterday Looking for you to do some more mods to BigToe's Bios 704-2bta2AND the same to the Expert version of the Bios x704. I think you have made some of the changes already I would like this: ADVANCED BIOS - Full Screen Logo - Disabled ADVANCED CHIPSET - CPU Thermal Throttling - Disabled INTEGRATED PERIPHIALS - Under RAID Configuration Enable all 4 SATA RAID ports (Not IDE Ports) ie: Internal Phy SATA 3 RAID - Enabled Internal Phy SATA 4 RAID - Enabled Internal Phy SATA 1 RAID - Enabled Internal Phy SATA 2 RAID - Enabled USB Keyboard - Enabled USB Mouse - Enabled PNP/PCI Init Display First - PCIEx PC HEALTH STATUS CPU Fan Fully ON - >25 degrees Fan 2 Fully ON - >25 degrees NB Fan Fully ON - >25 degrees (Note: All fan settings to 25 degrees - Both ON & OFF) GENIE BIOS (Under) DRAM CONFIGURATION - Refresh Period (TRef) - 3120 LDT Voltage - 1.3 volts Vdimm - 2.8 volts VIA 1394 - Disabled I realize it may be some work but there have been so many posts about losing the RAID, USB, and FAN settings after flashing it could really help. I have 4 Standard LanParty rigs and 2 Experts to test ON. Needless to say I would really appreciate it very, very much. Let me know if you think you can pull it off. He's already sent me a bios to test, but unfortunately the Fan Speeds under System Health are not co-operating with modbin for him. And obviously until he understands how to change the fan speeds to 25 degrees across the board I don't think he feels comfortable in disabling the function altogether. I wsill point him at this link and maybe that IS an easier way to do it as I want all my fans on all the time. I am sure he will keep us posteed. Hard worker, that Tmod. Share this post Link to post Share on other sites More sharing options...
Guest Tmod Posted January 12, 2006 Posted January 12, 2006 Would it be better to disable the fan control or set it for the 25 degress? Tmod Share this post Link to post Share on other sites More sharing options...
soundx98 Posted January 12, 2006 Posted January 12, 2006 Personally I would rather have the function disabled all together. Now if the great and wonderous bios God could figure out to have them DEFAULT to 15 degrees I think he would make everyone EXTREMELY happy. I'm sure many would still like the adjustability function. I remain your Masta Beta Testa Share this post Link to post Share on other sites More sharing options...
Guest Tmod Posted January 12, 2006 Posted January 12, 2006 What are the default settings in the PC Health section? Tmod Share this post Link to post Share on other sites More sharing options...
soundx98 Posted January 12, 2006 Posted January 12, 2006 http://www.angrygames.com/nf4-bios2.htm second screen Share this post Link to post Share on other sites More sharing options...
Guest Tmod Posted January 13, 2006 Posted January 13, 2006 I remain your Masta Beta Testa Ok Masta Beta Testa you have some work in your PM box!! Tmod Share this post Link to post Share on other sites More sharing options...
soundx98 Posted January 13, 2006 Posted January 13, 2006 Hope "Sparky", Gipse, robo989 and SPHERE and others are still watching this thread. Looks like the master bios modder has pulled off another one for us What I asked for "Originally Posted by soundx98 Looking for you to do some more mods to BigToe's Bios 704-2bta2 AND the same to the Expert version of the Bios x704. I think you have made some of the changes already I would like this: ADVANCED BIOS - Full Screen Logo - Disabled DONE - You'll be able to see the system Health Screen as it posts ADVANCED CHIPSET - CPU Thermal Throttling - Disabled DONE - I think most of us Disable this anyway INTEGRATED PERIPHIALS - Under RAID Configuration Enable all 4 SATA RAID ports (Not IDE Ports) ie: Internal Phy SATA 3 RAID - Enabled Internal Phy SATA 4 RAID - Enabled Internal Phy SATA 1 RAID - Enabled Internal Phy SATA 2 RAID - Enabled DONE - So those with RAID won't lose the RAID array/OS when it boots USB Keyboard - Enabled USB Mouse - Enabled DONE - Should help us USB users PNP/PCI Init Display First - PCIEx DONE - VGA Boots after flash to PCIEx instead of PCI PC HEALTH STATUS CPU Fan Fully ON - >25 degrees Fan 2 Fully ON - >25 degrees NB Fan Fully ON - >25 degrees (Note: All fan settings to 25 degrees - Both ON & OFF) Almost DONE - All Fan settings to 15 degrees ON & OFF at Defaults - All on FULL -See notes below GENIE BIOS (Under) DRAM CONFIGURATION - Refresh Period (TRef) - 3120 DONE - Default anyway but it can be changed LDT Voltage - 1.3 volts DONE - Slight Bump in Voltage Vdimm - 2.8 volts DONE- Slight Bump in Voltage VIA 1394 - Disabled DONE- Why not - ENABLE if you wish manually I realize it may be some work but there have been so many posts about losing the RAID, USB, and FAN settings after flashing it could really help. I have 4 Standard LanParty rigs and 2 Experts to test ON. Needless to say I would really appreciate it very, very much. Let me know if you think you can pull it off. Course he did" FAN SPEED NOTES: Because of the way this section of the Bios is written, Temps go from default 15 to 26 through 75 degrees. Tmod is going to try to CHANGE the range from 25 to 75 to 15 to 65. This will take a little trial and error to work correctly but hopefully will have answers tomorrow night. Tmod does NOT have an NF4 so that's why we need testing WE NEED INPUT does this make sense to anyone else? Please feel free to post your thoughts and opinions. I'm even more concerned about the Expert board as I'm pretty well convinced that the temps reported are low. want to make sure these CPU fans are going on and not stressing the CPU. It sure seems to me that those that have left there Chipset fans on all the time, seem to have no noise or problems, and those that let it speed up and down are having noise and sometimes failure issues. If Tmod can get this down he should be able to tackle the Expert easily. Share this post Link to post Share on other sites More sharing options...
THunDA Posted January 13, 2006 Posted January 13, 2006 Do you think enabling all the raid channels by default will mess up people that have 2 drives in raid and a single backup drive (all sata) ? Im not saying it will mess up I just dont usually enable them all when using only two drives in raid.. Other then that the rest looks good.. I mean the other stuff is just to make it easy for some that arent as familiar with the bios.. I guess Ive been in it soooo much I can change things with my eyes closed..lol Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now