Worm Posted August 28, 2005 Posted August 28, 2005 Ok now this is just weird. I grabed some USB to PS/2 converters and put them on both my keyboard and mouse and hooked them back up. I then turned my system back on and during the splash screen I pressed the delete key and the next screen is black with a blinking cursor. What the heck is going on?? Do I need to RMA my motherboard? EDIT::ok this is even weirder. I keep getting a message telling me to reset my CPU frequency...I have that on auto...someone care to explain? No, you don't need to RMA your board. Just remove the converters and go back to the way you were using them before. USB polling frequency is 125Mhz while PS/2 is 150Mhz. Adding a converter allows the component to be plugged into a PS/2 port, but doesn't change the polling frequency. That can cause the system to malfunction. If you want to use PS/2 ports, buy the correct components for the job. Share this post Link to post Share on other sites More sharing options...
Psitech Posted August 28, 2005 Posted August 28, 2005 Hey Worm, I tried your floppy technique you suggested and still can't get mine going. It doesn't initiate the floppy to read the disk. I'm still hanging on the bootsplash. The only led left is just the one. It starts with the 4 leds but ends on just the one and hangs on the boot splash. I wanted to get some more input just to see if maybe I'm doing something wrong. I'll be sending it back tomorrow for sure if I can't get some kind of improvemement today. Thanks Share this post Link to post Share on other sites More sharing options...
Zer0X Posted August 28, 2005 Posted August 28, 2005 Hey Worm, I tried your floppy technique you suggested and still can't get mine going. It doesn't initiate the floppy to read the disk. I'm still hanging on the bootsplash. The only led left is just the one. It starts with the 4 leds but ends on just the one and hangs on the boot splash. I wanted to get some more input just to see if maybe I'm doing something wrong. I'll be sending it back tomorrow for sure if I can't get some kind of improvemement today. Thanks Ditto... There has to be a work around (I hope) Share this post Link to post Share on other sites More sharing options...
Worm Posted August 29, 2005 Posted August 29, 2005 Hey Worm, I tried your floppy technique you suggested and still can't get mine going. It doesn't initiate the floppy to read the disk. I'm still hanging on the bootsplash. The only led left is just the one. It starts with the 4 leds but ends on just the one and hangs on the boot splash. I wanted to get some more input just to see if maybe I'm doing something wrong. I'll be sending it back tomorrow for sure if I can't get some kind of improvemement today. Thanks If it hangs with just one LED lit, it means it's not detecting the graphics card. Try reseating it in the slot. Share this post Link to post Share on other sites More sharing options...
Psitech Posted August 29, 2005 Posted August 29, 2005 I've tried reseating the video card about 5 different times and it makes no difference. I thought 1 led meant that it had detected the vid card and 0 leds meant that it had booted into the OS. Share this post Link to post Share on other sites More sharing options...
Zer0X Posted August 29, 2005 Posted August 29, 2005 Even after flashing the BIOS successfully I still can't install windows since it hangs...every 5 out of 6 reboots fails (after splah screen there is nothing but a blank screen with a blinking cursor) I know it is not my grpahics card(s) either. I tried two 6800Ultras in SLI and single mode, 7800GTXs in SLI and single mode, a x850 xt pe and a x800 xt pe. no difference...where do I get my RMA number from? Share this post Link to post Share on other sites More sharing options...
Sage2050 Posted August 29, 2005 Posted August 29, 2005 i too am having this problem. started randomly last night. only difference is that mine hangs on 3 leds and i have to remove a ram stick to get it down to 1 and sometimes get the splash. ok, i somehow made it to POST, but if i try to go into CMOS or press F1 to continue, the screen goes black. Share this post Link to post Share on other sites More sharing options...
Zer0X Posted August 29, 2005 Posted August 29, 2005 i too am having this problem. started randomly last night. only difference is that mine hangs on 3 leds and i have to remove a ram stick to get it down to 1 and sometimes get the splash. ok, i somehow made it to POST, but if i try to go into CMOS or press F1 to continue, the screen goes black. Bingo. Argh this sucks I have to get this up before friday. Share this post Link to post Share on other sites More sharing options...
Zer0X Posted August 29, 2005 Posted August 29, 2005 ' Share this post Link to post Share on other sites More sharing options...
Sage2050 Posted August 29, 2005 Posted August 29, 2005 maybe DFI mobos have some weird 8/27/05 glitch on them that just now came up? honestly, i had never heard of this problem till i decided to restart my PC for the first time in a few weeks last night, and then i come here and there are like four or five other threads with the same exact problem. this needs some serious investigation. Share this post Link to post Share on other sites More sharing options...
Psitech Posted August 29, 2005 Posted August 29, 2005 maybe DFI mobos have some weird 8/27/05 glitch on them that just now came up? honestly, i had never heard of this problem till i decided to restart my PC for the first time in a few weeks last night, and then i come here and there are like four or five other threads with the same exact problem. this needs some serious investigation. I agree that this needs to be investigated. Knowing what causes it would be a big help and atleast point you in a direction for troubleshooting. I'll see what happens with my 2nd board. I worked with mine over a week and finally sent it back to newegg this morning. Share this post Link to post Share on other sites More sharing options...
Zer0X Posted August 29, 2005 Posted August 29, 2005 maybe DFI mobos have some weird 8/27/05 glitch on them that just now came up? honestly, i had never heard of this problem till i decided to restart my PC for the first time in a few weeks last night, and then i come here and there are like four or five other threads with the same exact problem. this needs some serious investigation. I noticed that too my PC had frozen during BF2 so I forced a t shutdown and it has been like this ever since. Not even boot and nuke can run on my system. Something is way off the mark. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now