Sydney

Mine too sometimes, if I take the battery out and measure it, its 3.00v

Its an butt to get that to work, not sure if there is a way, without running some 3rd party software on the pc. You maybe able to get it to work by bridging the wlan and lan connections on pc (select both, right click, bridge), and there maybe some options in router need changing, and you'll probably need to set the ip manually in the xbox. I'm not too sure really tho, I never got it to work, wasnt too important and I couldnt be bothered playing with it. Networking is a bit gay when it doenst work lol.

What do you expect if you have a chip that does that?

Made this for myself, maybe its useful to someone else!

Dont buy it then, but tbh I didnt have any major problems, I flashed it as soon as it was up and running tho. Why dont you wanna flash it, its no big deal with tmods bios cd? It really is an amazing board for the price.

Mine dont beep. Try the ram in the orange slots, or try just one module in every slot, to see if you can get it to post.

From that I'd say you need 1.6v and better cooling.

Me too, you've probably just nicked a track in the cpu pcb, and thats why it dont work right.

Yeah youre right actually, I was comparing it to my dc opty @ 3ghz But even still, you get to a point with normal cooling where upping the voltage doesnt help the overclock, since the extra heat generated is detrimental to the stability.

Dont really matter with that setup, because much over 1.5v and its gonna get too hot. I ran my winny at 1.525 pretty much 24/7 for a couple of years no problem.

Why not an opteron 165? I just got one from america, was £150 inc customs and delivery, and does 3ghz stable fairly easily! Besides what are you going to do when all new games can use both cores to thier full potential which I'm sure will happen.

Memory settings have a look in the ocdb, and try to find someone with a similar setup, mobo and ram, and go from there.

DFI LANPARTY RDX200 CF-DR (12/23/2005 BIOS) AMD Opteron 165 Toledo CCBBE 0615EPMW, TR Ultra-120, 4°C Ambient temp. :cool: Patriot PDC1G3200+XBLK 2 x 512MB (TCCD) ATI Radeon X850XT, 570/610 Catalyst 8.31 drivers 120GB Western Digital 7,200RPM SATA hdd Pioneer DVR-109 Black IDE DVD-RW Drive Hiper Type-M 580W - HPU-4M580-PX v2 * * * * ========== [b]Genie BIOS Settings:[/b] [color=red] FSB Bus Frequency............................. - 334 HT PLL High Speed............................. - Enabled LDT/FSB Frequency Ratio....................... - x3 CPU/FSB Frequency Ratio....................... - x9 CPU VID StartUp Value......................... - 1.500v NB-SB Port Configuration...................... - Enhanced CPU VID Control............................... - 1.500v CPU VID Special Control....................... - Above VID * 112% DRAM Voltage Control.......................... - 2.84v SB PCIE Voltage............................... - 1.8v NB Analog Voltage............................. - 1.2v LDT Bus Voltage............................... - 1.2v NB Core Voltage............................... - 1.2v [/color] [b]DRAM Configuration Settings:[/b] [color=red] DRAM Frequency Set............................ - 150=RAM/FSB:03/04 Command Per Clock (CPC)....................... - Enabled CAS Latency Control (Tcl)..................... - 3.0 Bus Clocks RAS# to CAS# delay (Trcd)..................... - 04 Bus Clocks Min RAS# active time (Tras)................... - 08 Bus Clocks Row precharge time (Trp)...................... - 04 Bus Clocks Row Cycle time (Trc).......................... - 11 Bus Clocks Row refresh cyc time (Trfc)................... - 16 Bus Clocks Row to Row delay (Trrd)....................... - 03 Bus Clocks Write recovery time (Twr)..................... - 03 Bus Clocks Write to Read delay (Twtr).................... - 02 Bus Clocks Read to Write delay (Trwt).................... - 03 Bus Clocks Refresh Period (Tref)......................... - 3632 Cycles DRAM Bank Interleave.......................... - Enabled DQS Skew Control.............................. - Auto DQS Skew Value................................ - 0 DRAM Drive Strength........................... - Auto DRAM Data Drive Strength...................... - Auto Max Async Latency............................. - 8.0 ns Read Preamble Time............................ - 6.0 ns IdleCycle Limit............................... - 128 Cycles Dynamic Counter............................... - Disable R/W Queue Bypass.............................. - 16x Bypass Max.................................... - 4x 32 Byte Granularity........................... - Disable (8 Bursts) [/color] ========== Prime95 + 3dMark2001SE + CPU-Z: http://sydney.entadsl.com/2001.JPG 3dMark2003: 3dMark2005: 3dMark2006: ========== short description: 334x12 @ 3006Mhz, 1.680v (Measured with professional DMM, spot on 1.680v) 3.0-4-8-4 @ 2.84v vdimm

Look in OCDB rules.

Search is your friend, there was dicussion about this recently.