Help with EXE Flashing

[zac1]

Is there a Bios 510.2 exe not a rip?????

 

If there is I cant find it.

 

Not sure how to do the rip, dont realy want to just a bit to tricky for me .

 

But EXE no worries.

 

Are you about Sharp with any good advice as allways mate.

 

Cheers

[Sharp]

Hello,

 

ZIP files are easy to use

 

If you download the BIOS 510-2FIX.zip

 

^^^^^^^^^^^^^^^^^^^^^^^

HOW TO FLASH THE BIOS

Download this run it to make a RAMDRIVE boot disk.

http://www.nerdlabs.org/bootdisks/diskimages/wboot98se.exe

 

Then get a 2nd disk

- Copy everything in the BIOS zip to it (Extract the files)

- eg, copy awdflash.exe and 510-2FIX.bin to it.

 

- Boot from the RAMDRIVE DISK

 

- Start computer without cdrom support.

- Once it has loaded insert the 2nd disk.

 

Type

copy a:*.* c:

Press enter

 

Type

c:

Press enter

 

Type

awdflash 510-2FIX.bin /py /sn /cd /cp /cc /LD /R /f

Press enter

 

It should flash the BIOS.

 

- Then you must turn the PC off

- Clear the CMOS using the JBAT jumper, leave it there for 10mins.

- Then put it back and when you power the PC enter the BIOS.

- Load optimised defaults, save and exit.

- Enter the BIOS and go to CMOS reloaded.

- For each profile, save the current settings.

- Then save and exit.

- Now you can enter the BIOS and change the settings.

 

^^^^^^^^^^^^^^^^^^^^^^^

 

Or you can use Pershoot's ISO, bootable CD that contains all the BIOS files.

http://dfi-street.com/forum/showthread.php?t=6369

post #3 here.

 

How to burn the ISO

http://dfi-street.com/forum/showthread.php...highlight=roxio

 

And if all that is too much for you, I made this (FlashXpress)

(last post here)

http://dfi-street.com/forum/showthread.php...3939#post163939

 

It does everything I said with ramdrive but automatically.

No one has tested to see if it works but I am sure it will.

[cpuz]

when you say 'rip' do you mean zip?

 

if your running winxp, just right click the downloaded file and click "extract all". a wizard will pop up, follow it along and tell it where you want it to extract to.

[zac1]

when you say 'rip' do you mean zip?

 

if your running winxp, just right click the downloaded file and click "extract all". a wizard will pop up, follow it along and tell it where you want it to extract to.

 

 

Yes I do all that I know how to rip extract, but thats has far as I get, with out not noing what to do.

 

Anyway Sharp what Bios do you reckon would be best for my set up, I know it is not that easy to say but any advice would help mate.

 

Cheers

[Sharp]

Hello,

 

Your modules use TCCD chips so a BIOS with extension -1 would be the way to go, suppose to be better for TCCD chips. (overclocking/performance).

 

510-1FIX

618-1

623-1

 

Which one?

The 510 series seems to get a lot of good results. (FIX version = improved 510).

So start with 510FIX-1.

[pershoot]

Yes I do all that I know how to rip extract, but thats has far as I get, with out not noing what to do.

 

Anyway Sharp what Bios do you reckon would be best for my set up, I know it is not that easy to say but any advice would help mate.

 

Cheers

 

burn the bios cdrom pack ISO mate:)

[zac1]

Hello,

 

Your modules use TCCD chips so a BIOS with extension -1 would be the way to go, suppose to be better for TCCD chips. (overclocking/performance).

 

510-1FIX

618-1

623-1

 

Which one?

The 510 series seems to get a lot of good results. (FIX version = improved 510).

So start with 510FIX-1.

 

Just flashed 316 Bios does not seem to bad????

 

But will try the 510 fix in a while not sure THOUGH sorry sharp for being a pain and unsure but thats just me.

 

IS THERE A 510-1 OR -2 OR -3 ANYWHERE ON EXE!!!!!!!!!!!!!!!!!!!!!!!!!

 

I done the 623-3 ????

 

Cheers Sharp!!!!!!!!!!

[Sharp]

Nope all the beta BIOS come in a ZIP and you have to do the rest yourself.

 

Do you have a CD writer, then you could use Pershoots ISO.

 

I have made a FlashXpress.exe for 510-1 510-2 & 510-3, but I have not uploaded them to my webspace.

 

Do you want them?

[zac1]

Nope all the beta BIOS come in a ZIP and you have to do the rest yourself.

 

Do you have a CD writer, then you could use Pershoots ISO.

 

I do have made a FlashXpress.exe for 510-1 510-2 & 510-3, but I have not uploaded them to my webspace.

 

Do you want them?

 

 

Yes please, I went to try and get them.

 

But if you could upload them that would be great Sharp.

 

Cheers!!!!

 

Yes Sharp 2 DVD RW, for got to put in sig

[Sharp]

"I do have made"

 

I think I need a break from posting, I usually never make any mistakes.

 

http://www.uploadstore.com/userfiles/sharp..._BIOS_510-1.exe

http://www.uploadstore.com/userfiles/sharp..._BIOS_510-2.exe

http://www.uploadstore.com/userfiles/sharp..._BIOS_510-3.exe

 

Let me know which ones you have have tried so that I know if they work.

Did you try any in the other link with 510FIX /618 / 623-3?

[zac1]

"I do have made"

 

I think I need a break from posting, I usually never make any mistakes.

 

http://www.uploadstore.com/userfiles/sharp..._BIOS_510-1.exe

http://www.uploadstore.com/userfiles/sharp..._BIOS_510-2.exe

http://www.uploadstore.com/userfiles/sharp..._BIOS_510-3.exe

 

Let me know which ones you have have tried so that I know if they work.

Did you try any in the other link with 510FIX /618 / 623-3?

 

No worries LOL.

 

Ok will post the ones I try!!!

Cheers