MinyAmoo Posted July 15, 2005 Posted July 15, 2005 sorry i did'nt see you had an ide hd :tooth: Share this post Link to post Share on other sites More sharing options...
audscott Posted July 15, 2005 Posted July 15, 2005 What's your CPU and system temperatures in BIOS? You may want to recheck your heatsink seating. NTKernal load failures have been CPU core voltage and heat related, in my experience. Have you increased the CPU, chipset and LTD voltages? Make sure you don't overvolt. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 15, 2005 Posted July 15, 2005 sorry i did'nt see you had an ide hd :tooth: It's my IBM 80 GB. CPU Temps are between 35-42°C System temps 40-45°C What is the heatsink? What shall i recheck? Yes i have increased more voltage but not overvolted. CPU Voltages is 1,3v 123% LDT 1.4v Chipset 1.7v And another news about my system. I tried to install windows without my IDE HDD and Primary Drivers (it's my burner Plextor Plexwriter) and i used optimized defaults in Bios ( FSB (auto) x 7 (manual) and i could install windows without any errors (not even ntfs.sys). It runs perfect but then i retried to use my old settings and with IDE = no chance i got the same erros (ntfs.sys). It's Bios or Mobo problem? What settings are specific for HDD and IDE? I have maybe to strong settings. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 15, 2005 Posted July 15, 2005 Push. Any suggestions? Share this post Link to post Share on other sites More sharing options...
GNU Posted July 17, 2005 Posted July 17, 2005 Push. I need suggestions please. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 21, 2005 Posted July 21, 2005 So i am back. I can install windows again. I have cleared the problem but my system is not stable. I can't get my system stable with every settings. My last settings are the same from my first post only data & drive strenght 7 3. Any suggestions to get my system stable without OC? Share this post Link to post Share on other sites More sharing options...
red930 Posted July 21, 2005 Posted July 21, 2005 Try post #10 here, http://www.bleedinedge.com/forum/showthread.php?t=9833 Share this post Link to post Share on other sites More sharing options...
GNU Posted July 21, 2005 Posted July 21, 2005 Thank you but do you believe it's a ram problem? Share this post Link to post Share on other sites More sharing options...
red930 Posted July 21, 2005 Posted July 21, 2005 It can't hurt to have a look at their suggestions Have you considered including the bios ver, you use in your sig? Share this post Link to post Share on other sites More sharing options...
GNU Posted July 21, 2005 Posted July 21, 2005 They have very good suggestions so i hope i can get stable settings. Oh i have forgotten it. 618-3 is my last bios. Share this post Link to post Share on other sites More sharing options...
GNU Posted July 24, 2005 Posted July 24, 2005 I got a stable system but one problem. I need suggestions about crashes without BSODS. I have a stable system after memtest and occt test but after the installation of windows. I get a crash (without bluescreen) with reboot in a random time. After the reboot windows xp shows an error window without any known problems. Where is the problem for my system crash? I need help. My system: 200 en 2.0 3 8 3 8 14 2 3 2 2 4708 auto en aut 0 level 7 level 2 7.0 normal auto 256 dis 16x 7x disable 4bursts 240 4x 16 16 auto 100 dis startup 1.3v 123% 1.3 1.7 2.9 It passed memtest #5 #8 after more than 15 passes and OCCT with highest CPU Load and 256mb memory. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now