LucifersMagician Posted January 15, 2006 Posted January 15, 2006 Ok on the Biohazard v2.0 by Psychotic-God... we cant get a image we turn it on and it says "No /input /signal".... what could be the issue with it?? only once have we gtten to the Xp screena nd then ti froze... last night the card was working fine..the only thing i did was put in a new power supply... from i think a 400 to a 350... Share this post Link to post Share on other sites More sharing options...
BrewMeister2010 Posted January 15, 2006 Posted January 15, 2006 So if you link to your rig is accurate, you are running your rig and watercooling, and you just went from 400W to 350W? Sounds like you might need those extra 50W Share this post Link to post Share on other sites More sharing options...
Psychotic_god Posted January 15, 2006 Posted January 15, 2006 So if you link to your rig is accurate, you are running your rig and watercooling, and you just went from 400W to 350W? Sounds like you might need those extra 50W 616721[/snapback] Yeah, well, to be accurate, we did change the MX-4000 to a Radeon x800Xl, that propably took a good additional chunk of power drain. Could the changed graphic card be the source? yet it was working when we first put it in. Share this post Link to post Share on other sites More sharing options...
WhenKittensATK Posted January 16, 2006 Posted January 16, 2006 1. make sure card is in all the way. 2. tighten the cable screws if its really loose and falls out like mine do. 3. if all else fails blow it up. could be the PSU going from a higher watt psu to a lower one is usually a big hint. try putting the old one back in, see wat happens. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now