CheeseMan42 Posted October 17, 2004 Posted October 17, 2004 okay, so here is the problem. i have 10 feet of wire and i need to make one or two areas. it can be a circle, a square, or both. i need to figure out an equation that will tell me how to maximize the area as well as minimize the area. any help would be appreciated. Share this post Link to post Share on other sites More sharing options...
CmpFreak88 Posted October 17, 2004 Posted October 17, 2004 Doesn't really sound like much of an equation there... I'd just guess and check. Share this post Link to post Share on other sites More sharing options...
MindDrive Posted October 17, 2004 Posted October 17, 2004 well - devide 10 into 4 - to make a square - measure each side and take a single measurement and then multiply it by itself (square the measuremnt) that will give you the easiest MOST area - you can also take that 10 ft piece of wire/whatever and make a circle - measure the diameter - devide that by 2 and do the equasion for finding the area of a circle if ya hold the the wire straight then there is no area - minimized ^_^ there ya go problem solved Share this post Link to post Share on other sites More sharing options...
BionicSniper Posted October 17, 2004 Posted October 17, 2004 you cannot maxamize and minimize something at the same time so do you mean maxe the area min the pirimeter?? Share this post Link to post Share on other sites More sharing options...
CheeseMan42 Posted October 17, 2004 Posted October 17, 2004 no i mean find the maximum area that can be achieved, and in a separate situation, find the lowest area that can be achieved. Share this post Link to post Share on other sites More sharing options...
BabyBalrog Posted October 17, 2004 Posted October 17, 2004 if i recall corectly a circle is the most efficient use of area, and of course a line is the owrse, otherwise its a rectant 5 long and 0 wide, hehe, I think the greater teh numebr of sides the greater teh area assuming perimeter is the same, and sence a circle has infinate sides... Share this post Link to post Share on other sites More sharing options...
CheeseMan42 Posted October 17, 2004 Posted October 17, 2004 well i think i figured it out. thanks for the input. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now