SkytTe Posted January 30, 2012 Posted January 30, 2012 Hi there. I just want to know if the Hyper 212 EVO will be louder than the stock cooler for my Phenom II X4 955 BE respectively at idle and full load ? My problem is that the stock cooler is extremely loud, it is not the temps that bothers me. So if the EVO can deliver all round lower noise, I'll buy it. I've been looking for the specs of the stock cooler, but it's nowhere to find. Hope someone knows this. Regards Skytte Share this post Link to post Share on other sites More sharing options...
d6bmg Posted January 30, 2012 Posted January 30, 2012 AFAIK, hyper 212 EVO is not very loud, even at full load. Share this post Link to post Share on other sites More sharing options...
Boinker Posted January 30, 2012 Posted January 30, 2012 I tested out one in a haf932 with the stock fans fitted. Its not loud at all even with a mesh case. Share this post Link to post Share on other sites More sharing options...
danieljury3 Posted January 31, 2012 Posted January 31, 2012 Even if it's too loud you could just slow it down or chuck a quieter fan onto it. Share this post Link to post Share on other sites More sharing options...
SkytTe Posted February 1, 2012 Posted February 1, 2012 Sound like I'll be buying the EVO. Would I gain most from it by going pull instand of push? (Not going both since I don't want a second fan) I have a HAF 912 plus which pulls in front and pushes in the rear. I'll also be adding a pull top the top and maybe a push in the side. Share this post Link to post Share on other sites More sharing options...
vandreadstriker Posted February 1, 2012 Posted February 1, 2012 If you already have an exhaust at the back I don't see why you need to do a push-pull config... Sure it may lower the temp by 1-2 but I'm not sure that it'll be worth the trouble.. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now