Phreelix Posted March 15, 2011 Posted March 15, 2011 Hey guys, I have read Dolk's Guide and think that I have a decent grasp on the material and tried to get a stable 4.0GHz OC using the FSB and changing all the settings instead of going with the raised multiplier because I couldn't find success with it before. I don't know what the problem is, so I was wondering if you could spot something I'm missing. The motherboard I'm using is the Asus M4A78T-E and the CPU is the AMD Phenom II x6 1090T. My current settings get me into Windows, but I crash a few minutes into Prime: CPU Multi: 16 FSB: 250MHz RAM: 1667MHz (Also, board only supports up to 1600MHz, is this still okay? I just won't get any extra performance out of it right?) Timings: 9-9-9-24 CPU/NB: 2500MHz HT Link: 2500MHz CPU Voltage: 1.45v CPU/NB Voltage: 1.25 RAM Voltage: 1.5v HT Voltage: 1.26v Thanks guys, I am not just trying to get an overclock out of you guys, I am looking for any places that look shaky to you since I am very new to this. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 15, 2011 Posted March 15, 2011 is the stock bclock 200mhz?? Share this post Link to post Share on other sites More sharing options...
Locutus Posted March 15, 2011 Posted March 15, 2011 Try dropping your FSB and raising your multi. Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted March 15, 2011 Posted March 15, 2011 Try dropping your FSB and raising your multi. Share this post Link to post Share on other sites More sharing options...
dihartnell Posted March 15, 2011 Posted March 15, 2011 Drop your HT link back to 2000 or close to that. There is no benefit in raising it and can cause instability. Drop your Ram back to around 1600MHz and up its volts to 1.65. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now