insomniac42 Posted December 10, 2010 Posted December 10, 2010 I cant seem to get stable after 415fsb i am lost I did what i could, my computer specs are as follows mobo: gigabyte ep45t-usb3p ram: 4 gigs (2 x 2) ocz platinum ddr3 cpu: QX9650 @ 3.645GHZ psu: xion power real 1100w hdd: 120GB revo drive gpu: Radeon X 1950 cooling: cooler master v8 stock fan replaced with 150cfm fan case: Xclio wind tunnel advance 2 250mm side fans(intake) 2 180mm top fans(exhaust) 1 120mm fan back (intake) http://valid.canardpc.com/show_oc.php?id=1528708 Share this post Link to post Share on other sites More sharing options...
insomniac42 Posted December 10, 2010 Posted December 10, 2010 I guess it might help if I say my goal is 4+ ghz. Share this post Link to post Share on other sites More sharing options...
mattyamdfanboi Posted December 10, 2010 Posted December 10, 2010 seeing as ur playing with the fsb, have u increased voltaged to ram as well??? seeing as they too are affected by fsb changes.. as well as chipsets like north n south bridges make sure u up voltages not only on the cpu but others as well little by little till its stable Share this post Link to post Share on other sites More sharing options...
insomniac42 Posted December 10, 2010 Posted December 10, 2010 seeing as ur playing with the fsb, have u increased voltaged to ram as well??? seeing as they too are affected by fsb changes.. as well as chipsets like north n south bridges make sure u up voltages not only on the cpu but others as well little by little till its stable some of them i have no clue what they control like mch core, mch/dram reference, mch reference, ich i/o, ich core my voltages are as follows CPU PLL 1.75000 CPU Termination 1.4000 CPU Reference .76000 CPU Vcore 1.45000 DRAM Voltage 1.7000 DRAM Termination .75000 Ch-A Data VRef .75000 Ch-B Data VRef .75000 Ch-A Address VRef .75000 Ch-B Address VRef .75000 MCH Core 1.4000 MCH/DRAM Reference .75000 MCH Reference .76000 ICH I/O 1.5000 ICH Core 1.1000 any idea what to change and what some of it means? Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted December 11, 2010 Posted December 11, 2010 some of them i have no clue what they control like mch core, mch/dram reference, mch reference, ich i/o, ich core my voltages are as follows CPU PLL 1.75000 CPU Termination 1.4000 CPU Reference .76000 CPU Vcore 1.45000 DRAM Voltage 1.7000 DRAM Termination .75000 Ch-A Data VRef .75000 Ch-B Data VRef .75000 Ch-A Address VRef .75000 Ch-B Address VRef .75000 MCH Core 1.4000 MCH/DRAM Reference .75000 MCH Reference .76000 ICH I/O 1.5000 ICH Core 1.1000 any idea what to change and what some of it means? Set DRAM Voltage to what the sticks are rated at (2.1v??) CPU Vcore should be plenty for now CPU Termination should be ok as well (but should be raised later) MCH Core is also fine I'd set all these to auto: CPU PLL 1.75000 CPU Reference .76000 DRAM Termination .75000 Ch-A Data VRef .75000 Ch-B Data VRef .75000 Ch-A Address VRef .75000 Ch-B Address VRef .75000 MCH/DRAM Reference .75000 MCH Reference .76000 ICH I/O 1.5000 ICH Core 1.1000 Share this post Link to post Share on other sites More sharing options...
insomniac42 Posted December 11, 2010 Posted December 11, 2010 Set DRAM Voltage to what the sticks are rated at (2.1v??) CPU Vcore should be plenty for now CPU Termination should be ok as well (but should be raised later) MCH Core is also fine I'd set all these to auto: CPU PLL 1.75000 CPU Reference .76000 DRAM Termination .75000 Ch-A Data VRef .75000 Ch-B Data VRef .75000 Ch-A Address VRef .75000 Ch-B Address VRef .75000 MCH/DRAM Reference .75000 MCH Reference .76000 ICH I/O 1.5000 ICH Core 1.1000 everything is on auto except Vcore and the ram voltage. the ram is only rated @ 1.65v the p/n for my ram OCZ3P2000LV4GK Share this post Link to post Share on other sites More sharing options...
insomniac42 Posted December 11, 2010 Posted December 11, 2010 i got to 495fsb this morning before it blue screened. after it did that win 7 wouldn't start i think it said mbr or something along the lines of bootmgr. this took me an hour to fix because i have the revo drive and no drivers for it. all is fixed now. with the voltages i listed which should i raise and how high should i raise them. my goal for now is 500fsb 4.0GHZ and my ram will be @ 2000MHZ 9-9-9-30 Share this post Link to post Share on other sites More sharing options...
IVIYTH0S Posted December 11, 2010 Posted December 11, 2010 i got to 495fsb this morning before it blue screened. after it did that win 7 wouldn't start i think it said mbr or something along the lines of bootmgr. this took me an hour to fix because i have the revo drive and no drivers for it. all is fixed now. with the voltages i listed which should i raise and how high should i raise them. my goal for now is 500fsb 4.0GHZ and my ram will be @ 2000MHZ 9-9-9-30 lower the ram speed, usually windows boot errors are caused by ram instability. Share this post Link to post Share on other sites More sharing options...
insomniac42 Posted December 12, 2010 Posted December 12, 2010 got a blue screen today with stop message, STOP: 0X0000000A (0X078D43CC,0X00000002,0X00000000,0X82ADA869) any clue what that means? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now