dling Posted March 13, 2010 Posted March 13, 2010 (edited) ok ive been running on the same settings for a while stable. so i get a new cooler and think i can move up in voltage and speed because temps are lower. well after a while i give up and go back to my saved setting ,and now im having problems! BSOD! what gives? ive seen this so many times,you are good at a setting and try to change and have no success so you go back. guess what, it will not be stable there any more. i just dont under stand. have any of you had the same experience ? Edited March 13, 2010 by dling Share this post Link to post Share on other sites More sharing options...
BizaroStormy Posted March 13, 2010 Posted March 13, 2010 You might have damaged your chip with too much voltage. Will it run stable at stock settings? Share this post Link to post Share on other sites More sharing options...
ccokeman Posted March 13, 2010 Posted March 13, 2010 sometimes you make a change inadvertently and it causes problems. I always go back to the basic setup and start over Share this post Link to post Share on other sites More sharing options...
dling Posted March 13, 2010 Posted March 13, 2010 You might have damaged your chip with too much voltage.Will it run stable at stock settings? No it not to much voltage,i just moved it up to 1.27+ vcore. And yes it will run a defualt setting. Share this post Link to post Share on other sites More sharing options...
dling Posted March 13, 2010 Posted March 13, 2010 sometimes you make a change inadvertently and it causes problems. I always go back to the basic setup and start over that is what i kinda was thinking,just dont want to start all over. im sure you know how long that takes. but gota do it sometimes. still i just dont see how or why. it good before and not good now , same setting. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now