Luke08 Posted February 27, 2010 Posted February 27, 2010 Hello, I built my current system about 2 years ago. I'm not all that familiar with overclocking but did some reading up at the time and built it. I have been mildly overclocking the CPU since I built it and within the last few weeks I started getting BSOD Hardware Failures while playing games. I backed off the OC on the CPU and things are stable again. All settings below are what I had while OC, I only changed the CPU clock to back it off. Seeking some help on a few questions: 1. Is it common that over time OC settings need to be adjusted (just curious) 2. Can any of the more experienced members on the boards offer any suggestions on what to tweak (DRAM,SB,NB, ect) 3. I remember there being a very good guide for overclocking quadcores stickied on the boards and I can't find it - is it still around? System build and details from bios: Q6600 G0 - VID is 1.3250V + TRUE heatsink EVGA 512-P3-N801-AR GeForce 8800 GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card - Retail DFI LANPARTY DK P35-T2RS LGA 775 Intel P35 ATX Intel Motherboard - Retail Antec P182 Gun Metal Black 0.8mm cold rolled steel ATX Mid Tower Computer Case - Retail OCZ StealthXStream OCZ600SXS 600W ATX12V / EPS12V SLI Ready Active PFC Power Supply - Retail Mushkin Enhanced Blackline 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Health View: CPU Voltage 1.29V DRAM 2.01V NBcore 1.34V CPU VTT 1.21V ATX -3.3V 3.23V ATX -12V 12.22V 5V Standby 5.08V Battery Voltage 3.29V CPU Core 32C PWM Area 41C Chipset 34C CPU currently: 9x 266 CPU when OC: 9x 333 DRAM Speed: 266/800 PCIE Clock: 100Mhz DRAM Timing: Enhance Data Transmitting: Auto Enhance Adressing: Auto T2 Dispatch: Auto tCL 4 tRCD 4 tRP 4 tRAS 12 Voltages: CPU VID Special Add: +12.5mV DRAM voltage control: 2.000V SB 2.05 voltage: 1.70V SB Core/CPU PLL voltage: 1.55V NB Core voltage: 1.33V CPU VTT voltage: 1.200V Clockgen voltage control: 3.45V CPU GTL 0/2 Ref volt 0.67X CPU GTL 1/3 Ref volt 0.67X Nort Bridge GTL Ref volt: 0.67X Thanks Share this post Link to post Share on other sites More sharing options...
nanoprobe Posted February 27, 2010 Posted February 27, 2010 What type of error message do you get with the BSOD? Share this post Link to post Share on other sites More sharing options...
PeeWee90 Posted February 27, 2010 Posted February 27, 2010 I haven't heard of overclocks getting "old", but perhaps capactitatiors and such get worn out after a period of time... Maybe you need to up the voltages a bit. Share this post Link to post Share on other sites More sharing options...
Puck Posted February 27, 2010 Posted February 27, 2010 I haven't heard of overclocks getting "old", but perhaps capactitatiors and such get worn out after a period of time... Maybe you need to up the voltages a bit. This is very possible. As caps age, their leakage increases. This not only lowers stability, but increases power usage. You probably need a notch more vcore or to drop the OC a little to compensate. Share this post Link to post Share on other sites More sharing options...
Luke08 Posted February 27, 2010 Posted February 27, 2010 Below is the analysis of one of the dumps generated during the BSODs I was getting. I've looked through them all and they are all the same with the exception of PROCESS_NAME which varies depending on what I was doing at the time, usually it's the *.exe of the game I was playing at the time. ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* WHEA_UNCORRECTABLE_ERROR (124) A fatal hardware error has occurred. Parameter 1 identifies the type of error source that reported the error. Parameter 2 holds the address of the WHEA_ERROR_RECORD structure that describes the error conditon. Arguments: Arg1: 0000000000000000, Machine Check Exception Arg2: fffffa8004f02028, Address of the WHEA_ERROR_RECORD structure. Arg3: 00000000b2000040, High order 32-bits of the MCi_STATUS value. Arg4: 0000000000000800, Low order 32-bits of the MCi_STATUS value. Debugging Details: ------------------ BUGCHECK_STR: 0x124_GenuineIntel CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: f STACK_TEXT: fffff880`02f6ba58 fffff800`02c31903 : 00000000`00000124 00000000`00000000 fffffa80`04f02028 00000000`b2000040 : nt!KeBugCheckEx fffff880`02f6ba60 fffff800`02dee513 : 00000000`00000001 fffffa80`04f03d30 00000000`00000000 fffffa80`04f03d80 : hal!HalBugCheckSystem+0x1e3 fffff880`02f6baa0 fffff800`02c315c8 : 00000000`00000728 fffffa80`04f03d30 fffff880`02f6be30 fffff880`02f6be00 : nt!WheaReportHwError+0x263 fffff880`02f6bb00 fffff800`02c30f1a : fffffa80`04f03d30 fffff880`02f6be30 fffffa80`04f03d30 00000000`00000000 : hal!HalpMcaReportError+0x4c fffff880`02f6bc50 fffff800`02c30dd5 : 00000000`00000004 00000000`00000001 fffff880`02f6beb0 00000000`00000000 : hal!HalpMceHandler+0x9e fffff880`02f6bc90 fffff800`02c24e88 : fffffa80`03d26680 fffffa80`03d26788 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55 fffff880`02f6bcc0 fffff800`02cd87ac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40 fffff880`02f6bcf0 fffff800`02cd8613 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c fffff880`02f6be30 fffff800`02cde536 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153 fffff880`03316940 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiTryUnwaitThread+0x86 STACK_COMMAND: kb FOLLOWUP_NAME: MachineOwner MODULE_NAME: hardware IMAGE_NAME: hardware DEBUG_FLR_IMAGE_TIMESTAMP: 0 FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_BUS BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_BUS Followup: MachineOwner Share this post Link to post Share on other sites More sharing options...
ccokeman Posted February 27, 2010 Posted February 27, 2010 download and run Memtest 4.01. Burn the ISO to a disk and boot to it or make a flash drive bootable and boot to the ISO that way. See if you are having a memory problem first and for most. That's where most of my problems occur Share this post Link to post Share on other sites More sharing options...
Luke08 Posted February 27, 2010 Posted February 27, 2010 I've run memtest86+ several times for 12+ hours with no errors. Based on that I'm assuming it's not a bad memory module. Thanks Share this post Link to post Share on other sites More sharing options...
Luke08 Posted February 28, 2010 Posted February 28, 2010 Thanks for the tips, I bumped my core voltage a little and it's stable now after a 12hr prime95 test. Share this post Link to post Share on other sites More sharing options...
tazwegion Posted March 2, 2010 Posted March 2, 2010 Electro Migration should also be considered with aging systems especially those created with a lead-free solder process, overclocking shortens the service life of PC components (whilst enhancing the WOW factor) Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now