Danny_75 Posted January 6, 2010 Posted January 6, 2010 Well here we go. These are Temps on a Stock I7 860 This is a Water Cooler. It uses like a fridge compressor to freeze a compartment of water then via pipes pumps the water through the coil. These are Temps on a Stock I7 860 Temps on full load (Prime) 4.0Ghz ( Temps are above my norm been testing) Just some pics of the set up. Not the best but NOT pulling it all apart just for some pics. Will take some next time i clean it. This set up cost >>????? Share this post Link to post Share on other sites More sharing options...
Union Of V Posted January 6, 2010 Posted January 6, 2010 (edited) ...are there pics? [EDIT] looks like http://www.billingeautomotive.com/ is down... [EDIT] sweet! pity it's not a teensy bit smaller Edited January 6, 2010 by Union Of V Share this post Link to post Share on other sites More sharing options...
Danny_75 Posted January 6, 2010 Posted January 6, 2010 Is a bit big but its out the way. Can put up with the size if it runs 25/7 at those temps Share this post Link to post Share on other sites More sharing options...
cjloki Posted January 6, 2010 Posted January 6, 2010 Is a bit big but its out the way. Can put up with the size if it runs 25/7 at those temps what about condensation you ingenious danny you ? at those temps you're bound to have some. what precautions did you take ?, other than the tubing wrap. that is magic btw kwik edit: and what size tubin is that ? Share this post Link to post Share on other sites More sharing options...
Danny_75 Posted January 6, 2010 Posted January 6, 2010 I get a little on the pump in the case.( thats at the bottom) and a little on the block but think the 2 24inc fans on the case are drying it as soon as it forms. There is loads on the outlets from the cooler but thats outside the case so dont care about that. Fingers crossed Share this post Link to post Share on other sites More sharing options...
Water_Hazard Posted January 6, 2010 Posted January 6, 2010 does it make much noise? Share this post Link to post Share on other sites More sharing options...
overclocking101 Posted January 6, 2010 Posted January 6, 2010 i would still insulate with neoprene m8 at least part of the socket trust me consensation even a little kills hardware i have been through 3 boards and 2 cpus because of it even with neoprene there is a slight risk Share this post Link to post Share on other sites More sharing options...
Danny_75 Posted January 6, 2010 Posted January 6, 2010 (edited) does it make much noise? It sounds like a Big CPU cooler at 100% for about 2 hours on first out the box start up. after that it cuts in and out. When it cuts in its about the same as a 5870 on 40% fan speed. Edited January 6, 2010 by Danny_75 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now