RobBan-Swe Posted November 17, 2010 Posted November 17, 2010 (edited) o Edited November 18, 2010 by RobBan-Swe Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 17, 2010 Posted November 17, 2010 (edited) o Edited November 19, 2010 by RobBan-Swe Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 17, 2010 Posted November 17, 2010 (edited) Outdoor -1c ! forgotten the cpuz mem But anyway Super Pi 1mb 14.780s AMD 1090T, 4714mhz Aircooled, and only 11-13 degrees celcius noload. And only 1 DDR3 Hyperx 2000 ( my old 460w PSU is on the edge, dont start anymore with 2xDDR3 ) Maby to much OC Am on to + 4800Mhz on Air with new 850W PSU, maby 5000mhz with -20 degrees in january\february  Computer started at 19x254= 4826mhz but PSU shutdown after 2-3 seconds Edited November 17, 2010 by RobBan-Swe Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 19, 2010 Posted November 19, 2010 New Aircooled Super Pi 1MB World Record AMD 1090T with single channel memory 14.730s 4751mhz Soon 4800mhz on Air Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 19, 2010 Posted November 19, 2010 Super Pi 32MB 15m 48,942s AMD 1090T, 4655mhz Aircooled, ThermalRight Ultra-120 Share this post Link to post Share on other sites More sharing options...
Savan Posted November 24, 2010 Posted November 24, 2010 (edited) Im not done OC'ing yet, these are just some preliminary scores Phenom II 1090t @ 4009Mhz MSI 790GX-G65 Mobo Sunbeam Core Contact Freezer with Tunix TX-4   superpi 1M - 17.696  superpi 32M - 18:17.331  OCCT 1 hour stable  Edited November 24, 2010 by Savan Share this post Link to post Share on other sites More sharing options...
El_Capitan Posted November 24, 2010 Posted November 24, 2010 RobBan-Swe, can you share some BIOS settings and voltages you use? I seem to be stuck at getting no higher than 4.2GHz at high Core Voltages (CPU-Z Core Voltages spiking up to 1.632v), but I'm Prime95 and IntelBurnTest stable. I guess I should try overclocking my FSB more than my multiplier. Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 25, 2010 Posted November 25, 2010 RobBan-Swe, can you share some BIOS settings and voltages you use? I seem to be stuck at getting no higher than 4.2GHz at high Core Voltages (CPU-Z Core Voltages spiking up to 1.632v), but I'm Prime95 and IntelBurnTest stable. I guess I should try overclocking my FSB more than my multiplier. Â Yes of course, i give you all info\settings tomorrow after work. I try fsb 233 and 254 thats give me around +1866\2000mhz DDR3 both paste 4700mhz but 254 seem to work best. I Will overclock this weekend maby past 4800mhz Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 26, 2010 Posted November 26, 2010 (edited) My settings fsb 233-254 OK here we go... cpu : 1.48v- 1.53,1v max CPU\NB 1,28-1,31volt max HT 1,21-1,26V MAX NB 1,1- 1,16V MAX NB 1,8V STANDARD SB 1.12-1.16V MAX VDDA 2,5V VDDPCIE MAX 1,16V DRAM CTRL, 0.5V STD VOLT DRAM DATA, 0.5V STD VOLT Â DDR3 depends on settings but around 1.65-1,8v Memory config is very important and go offset on cpu and cpu/nb voltage Example 0.21v extra on cpu and 0.14v on cpu/nb.... offset on + Robban Edited November 26, 2010 by RobBan-Swe Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted November 26, 2010 Posted November 26, 2010 Superpi 1mb 14.510s AMD 1090T 4813mhz on Aircooler and only 1 DDR3 Soon i go for 13s with 2 of DDR3 Share this post Link to post Share on other sites More sharing options...
RobBan-Swe Posted December 3, 2010 Posted December 3, 2010 Hallo any overclockers on this site !!!!!! Reach 4800+ any ????? Share this post Link to post Share on other sites More sharing options...
insan3 Posted December 15, 2010 Posted December 15, 2010 (edited) temps are only -10c here, i am waiting until -25c and a 1090t Edited December 15, 2010 by insan3 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now