Jump to content

My Q6600 And Coolermaster Aquagate S1.... Help Needed From Pro Overclo


abid

Recommended Posts

hey can i overclock my cpu using that cpu????? help me.... give some guide for me on how to overclock... >< thanks

 

i got q6600, zalman thermal paste and aquagate s1.... ep35ds3l mobo.... and 8800gt.... THANKS..

 

BUT I GOT ONLY COOLERMASTER M520w MODULAR PSU! can i OVERCLOCK IT? LOL.. but the maximum power is 600w... help!

Edited by abid

Share this post


Link to post
Share on other sites

This will give you a little bit of help with the DS3L, these are the settings I used to get my E2140 to 3.0Ghz. Being as how you probably have different ram and your cpu uses a different multiplier you need to find the settings that work for you.

 

 

==========

 

 

MB Intelligent Tweaker (M.I.T.)

Robust Graphics Booster............. - Auto
CPU Clock Ratio..................... - 8x
CPU Host Clock Control.............. - Enabled
CPU Host Frequency (Mhz)............ - 375
PCI Express Frequency (Mhz)......... - Auto
Performance Enhancer................ - Standard
C.I.A.2............................. - Disabled
System Memory Multiplier (SPD)...... - 2.4
Memory Frequency (Mhz).............. - 900

DRAM Timing Selectable (SPD)........ - Auto
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 5
Precharge Delay (tRAS).............. - 15
ACT to ACT Delay (tRRD)............. - 4
Bank Write to READ Delay............ - 3
Write to Precharch Delay............ - 6
Refresh to ACT Delay................ - 42
Read to Precharge Delay............. - 3
tRD................................. - 8
tRD Phase Adjustment................ - 25

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - [+0.2]
PCI-E OverVoltage Control........... - Normal
FSB OverVoltage Control............. - Normal
(G)MCH OverVoltage Control.......... - Normal
CPU Voltage Control................. - 1.37600V
Normal CPU Vcore.................... - 1.32500V

 

 

==========

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...