Jump to content

My Q6600 And Coolermaster Aquagate S1.... Help Needed From Pro Overclo


abid

Recommended Posts

hey can i overclock my cpu using that cpu????? help me.... give some guide for me on how to overclock... >< thanks

 

i got q6600, zalman thermal paste and aquagate s1.... ep35ds3l mobo.... and 8800gt.... THANKS..

 

BUT I GOT ONLY COOLERMASTER M520w MODULAR PSU! can i OVERCLOCK IT? LOL.. but the maximum power is 600w... help!

Edited by abid

Share this post


Link to post
Share on other sites

This will give you a little bit of help with the DS3L, these are the settings I used to get my E2140 to 3.0Ghz. Being as how you probably have different ram and your cpu uses a different multiplier you need to find the settings that work for you.

 

 

==========

 

 

MB Intelligent Tweaker (M.I.T.)

Robust Graphics Booster............. - Auto
CPU Clock Ratio..................... - 8x
CPU Host Clock Control.............. - Enabled
CPU Host Frequency (Mhz)............ - 375
PCI Express Frequency (Mhz)......... - Auto
Performance Enhancer................ - Standard
C.I.A.2............................. - Disabled
System Memory Multiplier (SPD)...... - 2.4
Memory Frequency (Mhz).............. - 900

DRAM Timing Selectable (SPD)........ - Auto
CAS Latency Time.................... - 5 
DRAM RAS# to CAS# Delay............. - 5
DRAM RAS# Precharge................. - 5
Precharge Delay (tRAS).............. - 15
ACT to ACT Delay (tRRD)............. - 4
Bank Write to READ Delay............ - 3
Write to Precharch Delay............ - 6
Refresh to ACT Delay................ - 42
Read to Precharge Delay............. - 3
tRD................................. - 8
tRD Phase Adjustment................ - 25

System Voltage Control.............. - Manual
DDR2 OverVoltage Control............ - [+0.2]
PCI-E OverVoltage Control........... - Normal
FSB OverVoltage Control............. - Normal
(G)MCH OverVoltage Control.......... - Normal
CPU Voltage Control................. - 1.37600V
Normal CPU Vcore.................... - 1.32500V

 

 

==========

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...