Jarman Posted December 25, 2006 Posted December 25, 2006 Im sure i can reach that magic 3GHz marker on my opty 165, but i need some help The OC is stable in OCCT for 3hrs (i know i need to test for longer ) The thing is my ram will not run on a divider lower than 333MHz for some reason :/ this is causing me major problems!!! My poor OCZ ram is at DDR 495! Needless to say it doesnt like this (its stable but at high voltage with loose timings tested to DDR 500 with same timings for 14 hrs in memtest86+ from bios with no probs). :/ I dont feel i can push the ram much further. Any ideas on how i can get a lower divider to work??? Whenever i try a lower divider the machine posts but then reboots before trying to load windows!!! The chip is capable of more im sure, but i need help!! If i need to post any more info or anything please let me know. Thanks, & merry xmas Share this post Link to post Share on other sites More sharing options...
Jarman Posted December 25, 2006 Posted December 25, 2006 1m super pi in 30.344s btw, not bad Share this post Link to post Share on other sites More sharing options...
bcbooter Posted December 26, 2006 Posted December 26, 2006 my ram wouldnt use lower(certian) dividers either, holding back my 3ghz. dram drive strength and dram data strength try loosening them up! Share this post Link to post Share on other sites More sharing options...
THEnumber337 Posted December 26, 2006 Posted December 26, 2006 What BIOS are you running? Share this post Link to post Share on other sites More sharing options...
Praz Posted December 26, 2006 Posted December 26, 2006 Any ideas on how i can get a lower divider to work??? Whenever i try a lower divider the machine posts but then reboots before trying to load windows!!! The chip is capable of more im sure, but i need help!! If your 165 is like 99% of them the only thing that is going to help is PC4000 rated memory. Lower dividers are next to impossible to use with a high HTT. Share this post Link to post Share on other sites More sharing options...
Jarman Posted December 26, 2006 Posted December 26, 2006 Thanks for the replies Using latest BIOS from DFI site, just made a new thread not so long ago with some screenies etc of what ive managed so far. Praz i greatly appreciate your input, yes its impossible for me to get the divider to work under 150 and this is holding me back now!!! so ive ordered a 2GB cellshock kit at DDR 500 to help combat the problem link to new thread: http://www.dfi-street.com/forum/showthread.php?t=72384 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now