allston Posted December 14, 2006 Posted December 14, 2006 hi quick question if anyone has this RAM, on my ATI CFX3200 lanparty what would be the best timings and volts for overclocking? http://www.newegg.com/Product/Product.asp?...N82E16820227210 OCZ Platinum 2GB 2-3-2-5 OCZ4002048ELDCPE-K 2.8v current bios settings on my machine 2.5-3-2-5 1T and 2.65v thx for any help here Share this post Link to post Share on other sites More sharing options...
Kingfisher Posted December 14, 2006 Posted December 14, 2006 You can get alot of information by sorting through the OCDB. Locate folks with your RAM and if possible your cpu and motherboard and go to work. I would try voltages anywheres from 2.6 to 2.8. There shouldn't be a need to try and jack up RAM voltage to the moon. For example, my ballistix can go up to 285 @ 2.6v. Share this post Link to post Share on other sites More sharing options...
allston Posted December 14, 2006 Posted December 14, 2006 thx, im gonna go with 2.5-3-3-8 to see how that goes. and may be a little more volts Share this post Link to post Share on other sites More sharing options...
DrunkenMafia Posted February 17, 2007 Posted February 17, 2007 Hey allston I have this board with 2gb ocz xtc platinum pc3200. With all mem options set to auto I get 2.5,3,2,5 @ 2.65v. I found all I had to do was change the cas from auto to 2 and now it boots @ 2,3,2,5 @ 2.65v. I am not sure if your version has the same chip in it as the XTC but mine do not oc that good, I can get to about 235Mhz @ 3,4,4,8 before funny sh$# starts happening. From what I have read they do not like to much voltage, mine are not different @ 3v than 2.7v. I just leave em @ 2.7. Hope this helped a little Good on ya Share this post Link to post Share on other sites More sharing options...
wizurd of awwz Posted February 17, 2007 Posted February 17, 2007 check my sig, i have the same RAM 241mhz - 2.5-3-2-5 - 2.8v Share this post Link to post Share on other sites More sharing options...
Chump Posted February 17, 2007 Posted February 17, 2007 And mine are at 273mhz 3.3.6.2 2.8v look at my OCDB entry with the Opty 144. Also you have to use the 166 180 200 divider at this speed all others would not boot for me. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now