$mokeyJoe Posted December 5, 2006 Posted December 5, 2006 Hi there. After upgrading and reinstalling windows on a Raid0 i updated everything.Every software is again fully updated but i had 1 big problem.I updated everything without installing first my virusscanner and spyware software.Of course after installing them i had like 200! known viruses and spyware.No big problem i thought,just run both programs to clean and repair everything.Everything went ok that day but the next day...i can't get beyond this screen!(attached) I even can't hit 'del' or 'esc'.It does nothing!Could i help this with flashing Bios with diskette?Anything else?Every help is welcome.I hope i don't have to reinstall everything again...It would be maybe the easiest way,but it would take a long time again... $mokeyJoe Share this post Link to post Share on other sites More sharing options...
Clawhammer Posted December 5, 2006 Posted December 5, 2006 when i hang up there its usually a ram issue,or some ide device issue.try different ram if you can,be sure your devices are installed and configured correctly. i have also had success overcoming that hangup with the bios in my sig. p.s when installing windows unhook your ethernet connection and dont plug it in till you have antivirus and a firewall installed.i learned that the hard way to. Share this post Link to post Share on other sites More sharing options...
$mokeyJoe Posted December 5, 2006 Posted December 5, 2006 Well,i gotta admit that everything ran fine before,even with the viruses.Ram was fine,raptors also.Maybe i've removed some keys or so when removing viruses/spyware?Could it be a bios problem?Well,and could you resume a bit what i could try to do?I'm quite a noob,but i'm pretty autodidact!:cool: Share this post Link to post Share on other sites More sharing options...
Clawhammer Posted December 5, 2006 Posted December 5, 2006 remove your hard drives.....c if it boots try a different bios(i recommend tmods bios disc)..c if it boots try different ram or maybe 1 stick.........c if it boots in essence,try to minamize installed components to locate the problem Share this post Link to post Share on other sites More sharing options...
$mokeyJoe Posted December 5, 2006 Posted December 5, 2006 Ok,gonna try it tomorrow as now it's 23 o'clock and i've to get up at 2am. I'll let you know what follows,but thanks again,Clawhammer.Other inputs are also welcome. Share this post Link to post Share on other sites More sharing options...
Maarek_Stele Posted December 6, 2006 Posted December 6, 2006 Mine does that too if I leave some usb stuff connected like an ipod nano. Share this post Link to post Share on other sites More sharing options...
marker Posted December 6, 2006 Posted December 6, 2006 Mine does that too if I leave some usb stuff connected like an ipod nano. Yip mine does too, left my card reader with my CF card attatched, cable had fallen behind my desk, 3 hours later, and a stripped down pc, i found the bugger, pulled it out and rebooted no problem... Share this post Link to post Share on other sites More sharing options...
sparkyftw Posted December 6, 2006 Posted December 6, 2006 I also had this problem with my USB mouse. PS/2 adapter fixed that right up. with all my other usb stuff it works fine though. Share this post Link to post Share on other sites More sharing options...
Clawhammer Posted December 7, 2006 Posted December 7, 2006 Mine does that too if I leave some usb stuff connected like an ipod nano. same problem with creative muvo2 Share this post Link to post Share on other sites More sharing options...
$mokeyJoe Posted December 7, 2006 Posted December 7, 2006 I've left my USB HDD in the slot!Ooooops! Everything fine again! Thanks ppl! Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now