HELP with: Clearflex 60, PrimoFlex, or Tygon R-3603 (1/2")

[Transporter_GW]

Hey

 

I need help in selecting tubing (1/2") for my WC system.

I am looking at the following tubing:Clearflex 60, PrimoFlex, or Tygon R-3603

Just not sure on what to select, any input, PICTURES or thoughts on this?

[Xavior]

Depends on how tight the bends are going to be and if you're worried about your tubes clouding up. Tygon is best, but also the most expensive.

 

I prefer 7/16''ID Masterkleer. Very cheap, but a great alternative to Tygon.

[Nightshadow]

I use clearflex 60. Being that it works just fine and seems to be very well made, I have no problem with it. Tygon is great so I hear, but it is about twice the cost.

[PhoetuS]

I also prefer 7/16''ID Masterkleer, but I have never used Tygon before. Everything I hear about Tygon is that its great, but expensive.

[ooeric]

its all the same.. its just rubber.

i rather use 10$ to buy like 50 ft

the 10$ to by like 5ft.

[General Septem]

What's the difference between Tygon and the stuff they sell at Home Depot?

[Smoken Joe]

Depends on how tight the bends are going to be and if you're worried about your tubes clouding up. Tygon is best, but also the most expensive.

 

I prefer 7/16''ID Masterkleer. Very cheap, but a great alternative to Tygon.

 

Yes Trygon is the best but the Masterkleer is a close second and much cheaper. You can get 1-2 foot of the Trygon for the tightest loop if needed.

 

Tygon is by far the clearest if that matters.

[Transporter_GW]

Thanks for all your input, i will stay with Tygon even though the price is $$$. This time around i went from 1/2" to 7/16" for tubing. I will try to post pictures once its all done.