lowboy Posted August 19, 2006 Posted August 19, 2006 One more time single stick of memory will only work in slots #1 (usally best) 2 stick in 1&2 will be single channel. For dual channel memory in slot #2& #4 usally best or in slot #1& #3 or memory in all slots. Share this post Link to post Share on other sites More sharing options...
ForEvo Posted August 19, 2006 Posted August 19, 2006 One more time single stick of memory will only work in slots #1 (usally best) 2 stick in 1&2 will be single channel. For dual channel memory in slot #2& #4 usally best or in slot #1& #3 or memory in all slots. Well, THAT is the problem, as i wrote before! Slot 1 & 2 doesnt work with none of the sticks, only slot that works is 3! Tried all slots with both single sticks and dual.. Share this post Link to post Share on other sites More sharing options...
lowboy Posted August 19, 2006 Posted August 19, 2006 Read the manual gee.. the slot furthest from the cpu is #1(yellow)next on down is #2(orange) next is #3(yellow) the slot nearest cpu is #4(orange).Most memory like the orange slots. Share this post Link to post Share on other sites More sharing options...
Sharp Posted August 19, 2006 Posted August 19, 2006 Hello, I think you have the slot arrangement mixed up. slot 1 = top yellow slot 2 = top orange slot 3 = bottom orange (near cpu and will not work on its own) slot 4 = bottom yellow (even closer to cpu and will not work on its own) From what you have said, everything seems normal. EDIT lowboy stole my post Share this post Link to post Share on other sites More sharing options...
Badmonkey005 Posted August 19, 2006 Posted August 19, 2006 wait a minute... when I was reading through the memtest page I remember it saying something about how sometimes it reads that there is more memory than there really is... so all of the extra memory it trys fails and one way to figure out if that's whats happening is you will get a rediculous number of errors. Correct me if i'm wrong, but it might be that your memory is completley fine. Share this post Link to post Share on other sites More sharing options...
n_w95482 Posted August 19, 2006 Posted August 19, 2006 I've only seen that happen if I change the memory mapping option from e88 or whatever it is to one of the others. It used to work great on my Athlon XP box but it just causes issues on my S939 box. Share this post Link to post Share on other sites More sharing options...
Badmonkey005 Posted August 19, 2006 Posted August 19, 2006 I am often asked about the reliability of errors reported by Mestest86. In the vast majority of cases errors reported by the test are valid. There are some systems that cause Memtest86 to be confused about the size of memory and it will try to test non-existent memory. This will cause a large number of consecutive addresses to be reported as bad and generally there will be many bits in error. If you have a relatively small number of failing addresses and only one or two bits in error you can be certain that the errors are valid. Also intermittent errors are without exception valid. I found the place in the memtest site. Share this post Link to post Share on other sites More sharing options...
n_w95482 Posted August 19, 2006 Posted August 19, 2006 I understand that, I'm just saying from my experience, it only happens if you change the mapping mode. I'm sure it's the opposite in other systems; they need to be changed from default to work properly. I haven't had to do that yet, not even when Memtesting on a 386 . Share this post Link to post Share on other sites More sharing options...
ForEvo Posted August 19, 2006 Posted August 19, 2006 Read the manual gee.. the slot furthest from the cpu is #1(yellow)next on down is #2(orange) next is #3(yellow) the slot nearest cpu is #4(orange).Most memory like the orange slots. lol then there we have it, on Msi slot 1 is closet to cpu, och dfi closest is slot 4, then why didnt u guys say that in the beginning? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now