lowboy

I think the RF uses and metal brkt and spacing is off. I have not tried it but thats what others have posted.

The RF has different mount than the RE does.

How about you leave the attitude at the door or you will be left at the door.

Ya Good Luck!

Well modding the board voids the warranty.Still hanging at 3leds?

Run memtest from bios run test #5 for 5-10 passes and if good run full test for 4hr+. Stop on any errors and tweak memory settings.

memtest

These or the EBpc4000 :http://www.ncix.com/products/index.php?sku...CZ%20Technology

PSP please put location in user CP. Thanks

Have you tried it with only one stick of ram in orange slot furthest from the cpu as the newer bios are not likeing your memory.

It sound like you had other hdds hooked up when installing the OS. When installing XP only have the hdds that the OS is going on installed as windows will mess up and install files on other hdds.

Micron 5B G Chips

What mobo are you using post says one thing ,sig says another.

He doesn't have a DFI board.lol

Have you run memtest? Run test #5 for 5-10 passes and if good run full test for 4hr+ then you can install OS.

What temp does it show in bios?

Did you remove the battery? If so you need to do longer clear.

You are right the 2nd gen is better than the 1st but thats not saying much as ultra's are made for bling not for quality. I'm not saying that is your problem but is a psu I would never recommend.

Go to dfi.com has complete manual with all the information you need.

You need the 623 bios or later for the dual core to be reconized. You can use tmods cd from bios factory here on forum. Also always clear cmos after a flash.

You are running dual prime?

Look here:http://www.dfi-street.com/forum/showthread.php?t=22031

First run memtest from bios. Second think about better PSU. Also must have 623 bios or later for dual core.

http://www.dfi-street.com/forum/showthread.php?t=22031

These would be better for OCing:http://www.newegg.com/Product/Product.asp?...N82E16820148007