Mustang Posted June 9, 2006 Posted June 9, 2006 Hi Guys I really need help , I made the bios update from the version date 06-23-2005 to the last one and I have problems with my memory , I have a COrsair Twinx CMX 3200XL pro I was using it in slots 1 and 3 in dual channel bacuse my fan is covering slot 4 , When i update the bios to the last one in the DFI web if I keep the memory in the slot 3 the computer doesnt start , the only way that the computer boots is when i remove the memory in the slot 3 Please I need help in which setting should I change , thanks in advance and sorry about my english Share this post Link to post Share on other sites More sharing options...
cull Posted June 9, 2006 Posted June 9, 2006 remove the slot 1 DIMM and put the DIMM that is in slot 3 into slot 1 and see if that works Share this post Link to post Share on other sites More sharing options...
Mustang Posted June 9, 2006 Posted June 9, 2006 I made the change and my 2 memories are working fine , sholud I go back to the previos bios version or there is a setting that alloud me to keep using the yellow slots in dual channell?? Share this post Link to post Share on other sites More sharing options...
lowboy Posted June 9, 2006 Posted June 9, 2006 May think about going back to the 623bios. If it ain't broke don't fix it. Unless your having problems sometimes not good to flash to new bios, just so you have newer bios. Share this post Link to post Share on other sites More sharing options...
wevsspot Posted June 10, 2006 Posted June 10, 2006 The 623-1 through -3 worked well with my rig and two different sets of memory. Hynix based as well as Samsung based IC's. I particulary like the 0704-2bta, you might give that one a try also. And as lowboy says "if it aint broke dont fix it". Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now