mcvigo Posted May 14, 2006 Posted May 14, 2006 Alright i ditched the evga and bought dfi ultra d. My processor failed inmediatly at 1.45 v at 2.6 on the evga and crashed, with dfi 1.41v at 2.6 doesnt fail inmediatly AND IT IS A REFURB/USED MOBO!!(i dont leave it for long as i have heat issues) Now I have couple of questions, my 12v is 11.90 i dont have any stability issues but id expect more from this enermax. Also chipset is in the low 50s, is that ok? Share this post Link to post Share on other sites More sharing options...
Tameanaka Posted May 14, 2006 Posted May 14, 2006 chipset idles at low 50s, IMO that is high, but may be within ranges. Share this post Link to post Share on other sites More sharing options...
red930 Posted May 14, 2006 Posted May 14, 2006 I wouldn't expect much from a psu that barely (even by the numbers) meets the 480 watt req. for that board. The chipset is technically good to 70C...but if you can get it below 50 that'd probably be a good thing. Share this post Link to post Share on other sites More sharing options...
UTLanpartied Posted May 14, 2006 Posted May 14, 2006 I wouldn't expect much from a psu that barely (even by the numbers) meets the 480 watt req. for that board. The chipset is technically good to 70C...but if you can get it below 50 that'd probably be a good thing. his PS should be fine. I have no problems with a modstream 450. chipset temp, is that idle? mine idles around 42c Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now