K33B4 Posted April 18, 2006 Posted April 18, 2006 Hi guys!! I happen to enroll in Xtremesystems forums and be a member that was offered hand picked BH-5 that run at 2-2-2-5 @ 3.2v. I recieved mine at 1:15pm today and i put em to test right away these are initial test results that showed that this ram is highly capable to running tight timings at 1T and give a good OC. So far haven't had any crashes been stable at 3.53v The bios settings are as follows: DRAM fRequency 166Mhz CAS 2 Trcd 2 tras 5 trp 2 trc 7 trfc 13 trrd 2 twr 2 twtr 1 trwt 2 Tref 166 7.8us Twcl 1 Bank Interleave Enabled DQS Strobe Disbaled DQs Value 0 Drive Strength 7 Data Drive 3 Max Async Latency 9ns Dram Response Normal Preamble 5ns Idyle Cycle 256 Dynamic Counter Enable Bypass 16x Max 7x This ram can run Async latency of 6ns but i had to relax it to get the OC at 3.0Ghz Share this post Link to post Share on other sites More sharing options...
red930 Posted April 18, 2006 Posted April 18, 2006 Can you also put up a picture of your memory frequencies while you are at it? So how fast is your memory running at right now with that 166 divider, 500MHz+? Share this post Link to post Share on other sites More sharing options...
K33B4 Posted April 18, 2006 Posted April 18, 2006 It's running DDR500. Lemme get some pics real quick BrB. This ram is rated to run at 255X11 @ 3.2v and i'm running this at 3.53V Share this post Link to post Share on other sites More sharing options...
Pyr0 Posted April 18, 2006 Posted April 18, 2006 It's running DDR500.This ram is rated to run at 255X11 @ 3.2v and i'm running this at 3.53V why are you giving it extra voltage if you're only clocking it to 250MHz? [edit] check out the SPD tab in cpu-z, it should be customized i got in on this deal too, eagerly waiting for my kit to arrive :nod: looking forward to trying 4 sticks in the dfi venus Share this post Link to post Share on other sites More sharing options...
THunDA Posted April 18, 2006 Posted April 18, 2006 why are you giving it extra voltage if you're only clocking it to 250MHz? Yea why ???? 250-255mhz with 3.53vdimm is nothing special (no offence).. I have mushkin bh5 and some ocz utt bh5 that will do the same.. actually the mushkin would prolly do close to 260 with that much voltage.. Now if they can do that with 3.2v I'd be impressed.. ! Share this post Link to post Share on other sites More sharing options...
Pyr0 Posted April 18, 2006 Posted April 18, 2006 Hi Thunda all the kits were personally handtested by the g.skill tech on XS they should do 250MHz at 3.2V no probs [edit] This ram is rated to run at 255X11 @ 3.2v actually the ram isn't rated at 255MHz 3.2V, it's 255MHz with 3.3V Share this post Link to post Share on other sites More sharing options...
THunDA Posted April 18, 2006 Posted April 18, 2006 Hi Thunda all the kits were personally handtested by the g.skill tech on XS they should do 250MHz at 3.2V no probs Thats very cool then !! It will be interesting to see how they scale up with more voltage.. Share this post Link to post Share on other sites More sharing options...
K33B4 Posted April 18, 2006 Posted April 18, 2006 Pyr0 i checked out SPD and it does have a special number !!! oh yea btw i'm gonna reduce the voltage to 3.2 to see if it runs a 32M pass of Super PI Share this post Link to post Share on other sites More sharing options...
THunDA Posted April 18, 2006 Posted April 18, 2006 Nah dont reduce it.. leave the voltage high and crank up the mhz !!! :nod: jk take your time.. but it will be nice to see what they are capable of with more volts.. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now