Sharp Posted November 25, 2006 Posted November 25, 2006 Hello, Use 1 stick in the top orange slot, enter the bios and set CPC to disabled. - then save and exit, - turn off - and insert the other stick. - Power the pc What happens now? Share this post Link to post Share on other sites More sharing options...
BlueFlame Posted November 28, 2006 Posted November 28, 2006 Sharp, I have looked all over my bios and find nothing close to CPC, can you direct me to what else this may be called, and where in the bios is it located (genie bios, maybe?) Share this post Link to post Share on other sites More sharing options...
BlueFlame Posted November 28, 2006 Posted November 28, 2006 maybe I need to find an update to my bios (see my stats below) but can't find one for my version...) Share this post Link to post Share on other sites More sharing options...
Sharp Posted November 28, 2006 Posted November 28, 2006 Yeah you need to use bios 623-3 or above. Share this post Link to post Share on other sites More sharing options...
BlueFlame Posted December 3, 2006 Posted December 3, 2006 Hello, Use 1 stick in the top orange slot, enter the bios and set CPC to disabled. - then save and exit, - turn off - and insert the other stick. - Power the pc What happens now? Sharp, I really appreciate your helping with this problem....however, I have beem ALL OVER my BIOS and cannot find anything that says anuthing about CPC. I would dealy love to be able tho get the most from my board, but my bios version is different than the one that they show in the MB manual....so.... is there another name or way that the CPC is called or named? Thanks, and hope to hear from you soon... Share this post Link to post Share on other sites More sharing options...
Guest mori-kun Posted December 3, 2006 Posted December 3, 2006 When my ram dies......i can see me having to do a major upgrade :/ *prays to the ddr1 god* please make mine special and not let me fry them Share this post Link to post Share on other sites More sharing options...
BlueFlame Posted December 3, 2006 Posted December 3, 2006 Hello, Use 1 stick in the top orange slot, enter the bios and set CPC to disabled. - then save and exit, - turn off - and insert the other stick. - Power the pc What happens now? Sharp, I wish not to sound like an utter fool, but due to my own inadiquacies, I was worried about the correct bios..etc...but, I have successfully dl'd and installed the bios upgrade, and have done that what you suggested (having found the CPC line....heh heh heh), I wish to thankyou for your help in this matter and getting my problems resolved. Now, where did I put that AMD 64x2 chip...... Bye and thanks again. RC Share this post Link to post Share on other sites More sharing options...
DublinGunner Posted December 4, 2006 Posted December 4, 2006 Its also known as Command Rate, or Command per Clock. It typically has a value of 1 or 2 (enabled or disabled) Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 4, 2006 Posted December 4, 2006 With Older bios 310 the option is not there with the Venice core/newer core CPUs. Share this post Link to post Share on other sites More sharing options...
spoonz Posted December 6, 2006 Posted December 6, 2006 Hi All, After searching the forums around I think that this is the best spot to float a problem. I have just replaced my Cosair memory with Mushkin as stated in my sig and at random the computer freezes with pretty much default settings in Bios. I have set the memory to the factory 3.4.3.8 (200MHz) timings and the thing just freezes at random. I have run memtest for 6 hours and it worked fine without any fails. then when I disabled memtest and loaded windows it locked before all the stuff had finished loading :confused: It happens at random can happen 3 times a day or not happen for a few days :confused: I havent installed/removed any programs/drivers etc since changing the memory. Any thoughts would be appreciated. But I expect to do a full reinstall of windows. Thanks Spoonz. Share this post Link to post Share on other sites More sharing options...
Sharp Posted December 6, 2006 Posted December 6, 2006 Is the pc ok with the Corsair memory? Make sure you are using the orange slots. Set CPC to disabled. GENIE BIOS Setting >DRAM Configuration..................Press Enter = New Menu FSB BUS Frequency....................200 LDT/FSB Frequency Ratio..............X 5.0 LDT BUS Transfer Width...............16 16 CPU/FSB Frequency Ratio..............AUTO PCI eXpress Frequency................100Mhz K8 Cool 'n' Quiet Support............Disable Cool 'n' Quiet MAX FID...............AUTO CPU VID StartUp Value................StartUp CPU VID Control......................AUTO CPU VID Special Control..............AUTO LDT Voltage Control..................1.20 V Chip Set Voltage Control.............1.50 V DRAM Voltage Control.................2.70 V +0.3v if not 3.2v....................Disabled Run MemTest86+.......................Enabled, disable later GENIE BIOS Setting >DRAM Configuration DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01) Command per clock (CPC)..............Disabled Cas latency (tCL)....................3 RAS to CAS delay (tRCD)..............4 Min RAS active time (tRAS)...........8 Row precharge time (tRP).............3 Row cycle time (tRC).................11 Row refresh cycle time(tRFC).........14 Row to Row delay (tRRD)..............AUTO Write recovery time (tWR)............AUTO Write to read delay (tWTR)...........AUTO Read to write delay (tRWT)...........AUTO Refresh period (tREF)................AUTO Write CAS latency (tWCL).............1 DRAM Bank Interleave.................Enabled DQS Skew Control.....................AUTO DQS Skew Value.......................0 DRAM Drive Strength..................Level 8 DRAM Data Drive Strength.............Level 3 Max Async Latency....................6ns Dram Response........................Normal Read Preamble Time...................5ns Idle Cycle Limit.....................AUTO Dynamic Counter......................AUTO R/W Queue Bypass.....................AUTO Bypass Max...........................AUTO 32 Byte Granularity..................AUTO Random freezes are usually a sign of a weak power supply. Do you have all 4 power connectors plugged into the board? In windows also run Prime95 (in-place large FFT's) Share this post Link to post Share on other sites More sharing options...
cornel Posted December 9, 2006 Posted December 9, 2006 Helo, i want your help for choice from this memory kits: - TeamGroup 2*512 DDR500 http://www.teamgroup.com.tw/xtreem/overclo...em-zeus-series/ - OCZ 2*512 DDR400 - http://www.ocztechnology.com/products/memo...hannel_platinum If buy the kit from TeamGroup, work at DDR400 with 2-2-2-5? Thanks! PS. Sorry for my english! Share this post Link to post Share on other sites More sharing options...
Recommended Posts