ReXz0m Posted September 1, 2005 Posted September 1, 2005 what bios are u running? im running 5-10 -2 running 623-3 as said in eariler post.. please help :sad: Share this post Link to post Share on other sites More sharing options...
Sharp Posted September 1, 2005 Posted September 1, 2005 Try this, GENIE BIOS Setting >DRAM Configuration..................Press Enter = New Menu FSB BUS Frequency....................200 DRAM Voltage Control.................2.80V GENIE BIOS Setting >DRAM Configuration DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01) Command per clock (CPC)..............Enabled Cas latency (tCL)....................2 RAS to CAS delay (tRCD)..............3 Min RAS active time (tRAS)...........6 Row precharge time (tRP).............3 Row cycle time (tRC).................11 Row refresh cycle time(tRFC).........14 Row to Row delay (tRRD)..............3 Write recovery time (tWR)............2 Write to read delay (tWTR)...........1 Read to write delay (tRWT)...........1 Refresh period (tREF)................AUTO Write CAS latency (tWCL).............1 DRAM Bank Interleave.................Enabled DQS Skew Control.....................Decrease Skew DQS Skew Value.......................0 DRAM Drive Strength..................AUTO DRAM Data Drive Strength.............AUTO Max Async Latency....................6ns Dram Response........................Normal Read Preamble Time...................5ns Idle Cycle Limit.....................AUTO Dynamic Counter......................Disabled R/W Queue Bypass.....................AUTO Bypass Max...........................AUTO 32 Byte Granularity..................Disable (8 Bursts) Share this post Link to post Share on other sites More sharing options...
ReXz0m Posted September 1, 2005 Posted September 1, 2005 :drool: Try this, GENIE BIOS Setting >DRAM Configuration..................Press Enter = New Menu FSB BUS Frequency....................200 DRAM Voltage Control.................2.80V GENIE BIOS Setting >DRAM Configuration DRAM Frequency Set (MHZ).............200 (DRAM/FSB:1/01) Command per clock (CPC)..............Enabled Cas latency (tCL)....................2 RAS to CAS delay (tRCD)..............3 Min RAS active time (tRAS)...........6 Row precharge time (tRP).............3 Row cycle time (tRC).................11 Row refresh cycle time(tRFC).........14 Row to Row delay (tRRD)..............3 Write recovery time (tWR)............2 Write to read delay (tWTR)...........1 Read to write delay (tRWT)...........1 Refresh period (tREF)................AUTO Write CAS latency (tWCL).............1 DRAM Bank Interleave.................Enabled DQS Skew Control.....................Decrease Skew DQS Skew Value.......................0 DRAM Drive Strength..................AUTO DRAM Data Drive Strength.............AUTO Max Async Latency....................6ns Dram Response........................Normal Read Preamble Time...................5ns Idle Cycle Limit.....................AUTO Dynamic Counter......................Disabled R/W Queue Bypass.....................AUTO Bypass Max...........................AUTO 32 Byte Granularity..................Disable (8 Bursts) Tried... and got 89 errors @ Test #8. And then hanged. Share this post Link to post Share on other sites More sharing options...
diehrd Posted September 1, 2005 Posted September 1, 2005 I would try a different Bios ... Share this post Link to post Share on other sites More sharing options...
ReXz0m Posted September 1, 2005 Posted September 1, 2005 I would try a different Bios ... May i know which would you reconmend me? Share this post Link to post Share on other sites More sharing options...
diehrd Posted September 1, 2005 Posted September 1, 2005 May i know which would you reconmend me? http://www.dfi-street.com/forum/showpost.p...154&postcount=2 Share this post Link to post Share on other sites More sharing options...
ReXz0m Posted September 1, 2005 Posted September 1, 2005 http://www.dfi-street.com/forum/showpost.p...154&postcount=2 I read that, i just wanna ask which would you reconmend? In your opinion. Share this post Link to post Share on other sites More sharing options...
ReXz0m Posted September 1, 2005 Posted September 1, 2005 need help... Share this post Link to post Share on other sites More sharing options...
diehrd Posted September 1, 2005 Posted September 1, 2005 I can not honestly say..ther is a bios 623/03 a 02 a 01 I would try both if need be Share this post Link to post Share on other sites More sharing options...
indie24 Posted September 1, 2005 Posted September 1, 2005 im happy with 5-10 -2. See no reason to change mine Share this post Link to post Share on other sites More sharing options...
Boppo Posted September 1, 2005 Posted September 1, 2005 Remember that any non-official BIOS is use at your own risk. Share this post Link to post Share on other sites More sharing options...
indie24 Posted September 1, 2005 Posted September 1, 2005 DRAM Frequency Set - 200=RAM/FSB:01/01 Command Per Clock (CPC) - Enable (Try Disable - better compatabilty) CAS Latency Control (Tcl) - 2.0 RAS# to CAS# delay (Trcd) - 02 Bus Clocks Min RAS# active time (Tras) - 06 Bus Clocks Row precharge time (Trp) - 02 Bus Clocks Row Cycle time (Trc) - 08 Bus Clocks Row refresh cyc time (Trfc) - 12 Bus Clocks Row to Row delay (Trrd) - 02 Bus Clocks Write recovery time (Twr) - 02 Bus Clocks Write to Read delay (Twtr) - 01 Bus Clocks Read to Write delay (Trwt) - 02 Bus Clocks Refresh Period (Tref) - 3120 (Try Auto) Write CAS Latency (Twcl) - Auto DRAM Bank Interleave - Enabled DQS Skew Control - Auto DQS Skew Value - 0 DRAM Drive Strength - 7 (Important for me - change this value to ur own maybe get stable or try mine) DRAM Data Drive Strength - Level 1 Max Async Latency - auto DRAM Response Time - normal Read Preamble Time - auto IdleCycle Limit - 256 Cycles Dynamic Counter - Disable R/W Queue Bypass - 16 x Bypass Max - 07 x 32 Byte Granularity - Disable(8 Bursts) ok here are my settings. they are at 3.1v with fsb at 240. remember leave ur ram at 200 and cpu at default and put ram to around 2.9v. try these. For me the data drive and drive strength determine wether mine is stable or not. so try different combinations. on the 3-10 bios i think i had it at 8 for drive and 1 for data drive Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now