oXweebleXo

cooler master v10. i have it on a amd 9850 oc to 3 ghz and doesnt go over 45 and yea am2 works for am3

wrong topic sorry

on stock cooling you better monitor your temp you wont be able to clock it high anyway the multiplier would be the easiest way.

its valid now http://valid.canardpc.com/show_oc.php?id=597938

save a little more money and get your self a coolit self waler cooler. or save up more and get a CM v10

3.1Ghz @ Air

even if they are thumb screws for the pci it s still tool less

well if your planning on overclocking i would have to say get a better case just my 2 cents.

welcome

also CPU-Z shows the ram @ 5-5-5-15

yea this RAM really does suck. its rated for 1066 2v but when i set it for that (my bios only sees it at 800) and i run the OCCT is when i get the BSOD. im planning on getting something with low voltage and 5-5-5-15 timing. like the OCZ Blade series. right now im running a stable 2.9ghz with a 14.5x gonna play with the freq and see if i can get it to a stable 3 and run the occt for 24 hours. thanks for all the help guys. i swear this overclocking thing os so addicting

since it was made with BMW its gonna be expensive. hopefully they give me a 30,000mi 3year warranty

thanks i will try setting it back to the stock setting and run the test over. should i wait the full hour to make sure its stable? or can is there a certain period of time that i can just assume its stable

well i would just like to introduce my self. been reading lots of reviews from the site and just love it so i finally decided to sign up. My Setup is: AMD Phenom I 9850 BE @ 3.0Ghz @ Air Cooler Master V10 InWin B2 Bomber Case Foxconn Destroyer Fatal1ty (2x2GB) @ 1066 5-5-5-15 BFG Tech GTX 260 OC Maxcore BFG Tech 550W PSU Seagate 500GB SATA Vista Ultimate 32bit Now for the issue. I have been having problems of random shutdowns while playing games on 1080p 4AA with Vsync on a 46" TV. now theres no warning or anything and i dont have my bios set to shutdown at certain temps. My CPU idles at 35 C and loads anywhere from 45 to 50 C. Im thinking I may have RAM issues cause the Fatal1ty i have is running @ 5-5-5-15 but is rated at 7-7-7-20 and my My Mobo wont let me set it to that (lowest settings are 6-6-6). I am overcloking the CPU with a multiplier of 15 on stock voltage and the Ram wasnt seen as 1066 so i set the Voltage to 2.05 and manually put it to 1066. Hope fully i was specific enough to get some help but if theres any tips or problems you guys see please let me know. I am actually thinking of getting new ram but if its OK I wont be. I did run OCCT and got a BSOD saying my drivers were bad but didnt make any sense. I recently downgraded from the 64bit OS to 32 and hopefully it will fix this issue.