poulpii

A reasonable price I don't search extreme overclocking...

Not yet bought Waiting suggestions about all the choices.

Hello, I want to setup a new pc but I need your advices and recommendations and your help specially on watercooling system : The Goal for CPU (watercooled) is to reach the 4 Ghz @ 200mhz FSB ROCK STABLE. The Goal for GPU is to have the possibility to include 2 geforces (watercooled) in SLI (2X) in the future. (The choice of graphic card is definitive, I need a CUDA DirectX 11 card ) The Global Goal is to have a Quiet Configuration. List of Component : Processor : Intel i7 920 step D0 MotherBoard : EVGA X58 SLI LE link or ASUS Rampage II Extreme link Memory : G.Skill Trident 3x 2Go 1600 DDR3 Memory Kit Ref : F3-16000CL9T-6GBTD link Graphic Card : EVGA Geforce GTX 480 Hydro Copper link Case : Mountains Mods H2gO link PSU : Antec 850W TruePower Quattro link Hard Drive 1 : INTEL X25-M 80Go (V2 - PostVille) link Hard Drive 2 : Western Digital 500Go S-ATA II 16Mo Caviar Green link WaterCooling : I want to watercool the CPU and GPU(s), apparently it’s not necessary to watercool the chipset of motherboard to reach the 4GHZ. But I never setup a watercooling system and I’m a little worried about this… Reservoir : Swiftech MCR220-QP Res (Dunno if the fans are included) link Pump : Swiftech MCP655 Pump with speed controller link CPU Block : Swiftech Apogee XT Tubbing and Fitting : I don’t know Fluid : Distilled water I hope I forget nothing… Waiting your comments, thanks !

I have finally find the way to reach a fsb at 300MHZ by changing the Memclock

Do you know if there is a software to test if there is a video bottleneck problem ?

Yes, I have finally find the way in putting Max memclock to 133mhz with a FSB of 300 but there's something that I don't understand. I have exactly the same score with 3Dmark05 @ 1 800Mhz and @ 2740Mhz !! FSB = 300 x 9 AGP=68 HTT=3 and If i raise AGP nothing change !

to reach a fsb of 300 you must set Max Memclock in DRAM configuration to 133mhz !

Do u have a NF3 Ultra D ? me I can't have stable system over FSB 250 !!

Hey Neller do you have solve your problem ?

Hello, Someone could tell me if there a way to have the DRAM:FSB ratio feature in the bios of the NF3 ULTRA D ? Actually windows won't start over 260 mhz FSB... Thanks to you!

Hey ryankenn, I just would like to know if the base of your HR-01 cover all your Opteron, I ask you this because acutally I use my old Heatsink a SI 97A and the base doesn't cover all my opteron so the idle temperature is near 43°C . Otherwise I would like to know if u have used your HR-01 with the fan duct on a 12mm Fan. Thanks to you!

The Power Consumption of a Quadro FX 3000 is around 65W. But could you tell me what are the signs when your power supply is not enough for your configuration?

As you can read on my profile I have a Nvidia Quadro FX 3000 and this graphic card require to be directly connected to one of the jack of my Power Supply. Actually After installing the drivers nforce 5.11 windows never restart; after the pc boot the screen became black and nothing happened but difficult to say if it is a problem du to my power supply or a problem with my SCSI card...

I have actually a ANTEC 380W power supply and I have seen in my notice of my DFI NF3 that a power supply with a minimum of 400 Watt is strongly recommended. Considering my following configuration do you think that it could be a problem with my "only" 380 W ANTEC ? Thanks to you!

Anyone ?