RebelsHaven

Try Googling for: "Modbin6 CBROM32 Selectable option"

Google for "BIOS Mods" Modbin6, CBrom32 or similar. Tons of literature on the net...

Systool from Techpowerup... And another is the program by "Felix" at XS called Memset3.0....

49lf008a-33-4c

97TID830 is on the Beta site

97TID830 is on the Beta site...

The board is showing some preference for certain brands/models of memory. Not a huge difference, but a OC max never-the-less... I've tested the following at 400(4:3) divider, 5-5-5-15 which should be no problem, as the memory speed is 600 @ 400FSB: 1) Crucial Ballistix 1GB (2 x 512MB) DDR2 667 (PC2 5300) 2) Corsair XMS2 1GB (2 x 512MB) DDR2 1066 PC8500 3) OCZ 2x512Meg DDR2 OCZ2P6671GK DDR2 667 The Corsair is the best on this board booting at 405FSB and the OCZ was the worst having 385FSB as the top. Who knows what other brands do! Here we see the Corsair at 667-4-4-4-11:

5 other boards of 4 brands: 1-MSI, 1-Foxconn, 1-ASRock, 2-Biostar Memory Timings:

DFI Infinity Ultra II M2 711 BIOS AM2 3800 1.55Vcore(cpu-z is incorrect) OCZ 2x512 DDR667 2.2Vdimm EVGA 6600GT WD 80Gb ATA100 Rosewill 500W PSU Also no problem at high HTT. I have tested 5 other boards that had trouble at 280 with these same parts. Note SuperPI is a little faster then my other screenie....

DFI Infinity Ultra II M2 711 BIOS AM2 3800 1.55Vcore(cpu-z is incorrect) Corsair 2x512 DDR1066 2.2Vdimm EVGA 6600GT WD 80Gb ATA100 Rosewill 500W PSU This board runs great just like every DFI I have(nF3 Ultra, nF4 Ultra, RS482)!

@ OldGuy: Your story sounds exactly like what I experienced with a ASRock Dual SATA2 board 1st time around...... An RMA to the Egg and the 2nd board went smooth as silk... It sounds like your board is bad.... Do the RMA...

The other lead on the Inductors is the actual "Vcore", but it's very hard to get to..... The lead you have marked is the pulse-width modulated output before being filtered... It's almost the same as Vcore, especially considering how hard it is to reach the other Inductor lead.. Back on topic, both the 815 and this 824 BIOS do not seem to like Vinnies! I'm experiencing the "250 Bug" also with both... With a decent Winchester I can get to 9X300, but that's about it... Back to 711 for me...

In the States, they were at ATACOM the other day....

The board is still at ATACOM as of yesterday...

Try your 512 stick in slot by CPU... nF3/nF4 Ultra/SLI don't like RAM of 2 different sizes unless they are 2 sets...