Freek Posted September 20, 2004 Posted September 20, 2004 I need a relyable VDIMM MOD for my Lanparty rev.A is should be the samo thing as the LPb or Infinity so any pictures of those Vmods would help. Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted September 20, 2004 Posted September 20, 2004 do a forum search for vdimm mods as there's a guy that does them here on the LPB and he could probably set you in the right direction on the LPA...the two boards are different so dont try to use an INF/LPB mod for the LPA. also look in the off-topic section, t_ski has some voltage mod kits that clip-on, he might be able to steer you in the right direction. Share this post Link to post Share on other sites More sharing options...
podunk Posted September 21, 2004 Posted September 21, 2004 The vdimm mod for the Lanparty A is the same as the Lanparty B/Infinity. Keep in mind though that you do not have the variety of bioses with the Lanparty A as you do with the LanpartyB/Infinity. I got the mod from here...http://www.xtremesystems.org/forums/showth...hlight=Lanparty The only bios I tested with was the 7/9 performance bios. Share this post Link to post Share on other sites More sharing options...
Angry_Games Posted September 21, 2004 Posted September 21, 2004 heh i stand corrected then podunk only shows up to make me look bad... Share this post Link to post Share on other sites More sharing options...
Freek Posted September 21, 2004 Posted September 21, 2004 Yes the mod is the samo as the LP-b7infinty mod. But i need a table that saids what ohm value gives me what Volts. like for an exp. 60ohm=increase in 0.2V something like that. Share this post Link to post Share on other sites More sharing options...
R*r Posted September 26, 2004 Posted September 26, 2004 i have tried on ultra-al board which is the same i found that: 60k up 0,2v 32k up 0,3 v 27k up 0,41 v 22,2k up 0,55v 12k up 0,8v hope this help... Share this post Link to post Share on other sites More sharing options...
Freek Posted September 26, 2004 Posted September 26, 2004 Originally posted by R*r i have tried on ultra-al board which is the same i found that: 60k up 0,2v 32k up 0,3 v 27k up 0,41 v 22,2k up 0,55v 12k up 0,8v hope this help... Thanks Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now