joe9498 Posted May 1, 2003 Posted May 1, 2003 im having problems with thw raid utility basicly i cant use it the sscreen comes up to enter the utility (press f3 or ctrl s) but when i press them nothing happens p.s i dont have 2 hard drives hocked up (is that my problem?) Share this post Link to post Share on other sites More sharing options...
justinal Posted May 2, 2003 Posted May 2, 2003 are you talking about when you turn the computer it checks everytime for raid drives? Share this post Link to post Share on other sites More sharing options...
Overclocker16 Posted May 2, 2003 Posted May 2, 2003 You have to have 2 hard drives to do RAID. RAID is making 2 drives and making them like 1 or making 2 hard drives the exact same. One thing goes on hard drive 1, same exact thing on hard drive 2. Share this post Link to post Share on other sites More sharing options...
Mercury Posted May 2, 2003 Posted May 2, 2003 well to have raid, you do need 2 drives, but to get into the utility you do not one problem i always had was with my elite keyboard, the f keys werent on because of a button that turns them on or off was default at off when the system turned on maybe flash the bios too, that usually helps weed out any bugs or errors that may have snuck in Share this post Link to post Share on other sites More sharing options...
joe9498 Posted May 2, 2003 Posted May 2, 2003 (edited) im going to try to flash the bios tomorow hope that works, ill report back on my success or failyer. ty as as always joe9498 p.s. i know what a raid utility is my question was about entering the set up. my bad though i frazed the quewtion wrong alex Edited May 2, 2003 by joe9498 Share this post Link to post Share on other sites More sharing options...
Mercury Posted May 2, 2003 Posted May 2, 2003 good luck, make sure to try that f-key thing Share this post Link to post Share on other sites More sharing options...
kmk007 Posted February 11, 2004 Posted February 11, 2004 i bought this board back in november and thought it was great but last week i got 2 maxtor 80gig sata drives and thought YES lets raid them BUT no raid utility when i tried to enter the raid bios it just displayed 80,09 so i tried everything even ringing asus tec support boy did they have a clue NO!!. SO IVE SENT IT BACK UNDER WARRENTEE as i think its a fault on the board i tried loads of things and scanned every forum on the net I THINK and no one else seemed to have this problem so if you do and are reading this i will let you know what happens when the shop sends another to me. Share this post Link to post Share on other sites More sharing options...
Guest FxXP Posted February 11, 2004 Posted February 11, 2004 If you are not using the S-ATA, set the S-ATA jumper from 1-2 to 2-3 and be done with it. Once you do that, the S-ATA is turned off. Share this post Link to post Share on other sites More sharing options...
exeter_acres Posted February 11, 2004 Posted February 11, 2004 Why was a thread from may of 2003 dragged up? Share this post Link to post Share on other sites More sharing options...
Guest FxXP Posted February 11, 2004 Posted February 11, 2004 I didn't notice it till now. I figured D3 or LP would have closed it. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now