Guest buick454wnos Posted January 8, 2007 Posted January 8, 2007 i have one core failing time to up the voltage Share this post Link to post Share on other sites More sharing options...
ccokeman Posted January 8, 2007 Posted January 8, 2007 i have one core failing time to up the voltage Nice OC with low volts. Share this post Link to post Share on other sites More sharing options...
kingdingeling Posted January 8, 2007 Posted January 8, 2007 do you have core temp? You check the temps in there? I get 50C load in core temp but 38 in smartguardian, and I would believe core temp as it takes the temps directly from inside the cores. Share this post Link to post Share on other sites More sharing options...
Guest buick454wnos Posted January 8, 2007 Posted January 8, 2007 (edited) core temp is a POS IMO edit: its the same with both proggys Edited January 8, 2007 by buick454wnos Share this post Link to post Share on other sites More sharing options...
kingdingeling Posted January 8, 2007 Posted January 8, 2007 what the heck is on with mine then?! 50C Core Temp, 38C smarttguardian... *cycles to a friend to borrow a real temp probe* Share this post Link to post Share on other sites More sharing options...
hardnrg Posted January 8, 2007 Posted January 8, 2007 yeah i dunno why you use coretemp lol... the bios/mbm/smartguardian temps are accurate enough imo (for the dfi nf4 non-expert series anyway lol expert has incorrect temp values with some bios versions or something like that, i can't quite remember) anyway buick dude lol... you'd probably want to go head to head with ccokeman and/or caffeinejunkie cos i've got a toledo/denmark core that won't go much further... and they both have x2 3800s... both good initial results look promising... i got around 2.8-2.85 on stock volts on my single core opterons and they ended up 3.05-3.07GHz fully stable at ~1.61v Share this post Link to post Share on other sites More sharing options...
Guest buick454wnos Posted January 8, 2007 Posted January 8, 2007 nah, i have worse issues ATM Share this post Link to post Share on other sites More sharing options...
CheeseMan42 Posted January 8, 2007 Posted January 8, 2007 and since I have a higher OC than nrg . I think I'll post it up when I get home from work today. Share this post Link to post Share on other sites More sharing options...
hardnrg Posted January 8, 2007 Posted January 8, 2007 jolly good show old chap Share this post Link to post Share on other sites More sharing options...
Nerm Posted January 8, 2007 Posted January 8, 2007 *raises hand* Can I come out to play? lol 2.8ghz on stock volts is a good start. Hopefully that chip has plenty more head room with more voltage. Share this post Link to post Share on other sites More sharing options...
kingdingeling Posted January 8, 2007 Posted January 8, 2007 lol, Mr. Phase Change gets his gear ready On the heatsink it was more like the smartguardian temps, but I am gonna take off the heatsink and somehow attack the thermometer directly to the core and have a look at REAL temps core temp is correct.... sadly.... Had the shutdown temp at 65C, turned off the fan, had the thermometer to the heatsink, thermometer goes from around 35-45, smartguardian as well, Core Temp sears from 50 to 57 to 61 to 65 and it shut off... SO, the only thing I can test now is lower volts (doing that right now, 1.51smething) and see if thats stable... Share this post Link to post Share on other sites More sharing options...
hardnrg Posted January 8, 2007 Posted January 8, 2007 *raises hand* Can I come out to play? lol no! get back in your meatlocker... you can have a small hole to feed power and ethernet through and that's it! *slams door shut* Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now