hairybobby Posted September 6, 2006 Posted September 6, 2006 I have not got much experience with internet computers(I am not on the internet at home). I know someone who has two computers on the internet yet one of the computers does not work. Heres what I have done so far. I have swapped over the leads. The leads both work on one computer yet do not work on the other one. Then I checked through internet explorer to check if there was something in the configuration system that does not work So would I be right in assuming that this could be a motherboard problem. Its just I have not got any experience with internet connections at all Share this post Link to post Share on other sites More sharing options...
Silverfox Posted September 6, 2006 Posted September 6, 2006 firstly, try ipconfig/all in the start>run>cmd. see if the DHCP server and IP address looks normal. if not, then you want to be renewing them ipconfig/renew (in start > run > cmd) then check the adaptor settings in the control panel. check the firewall assuming it has one. double check the browser settings. try connecting in 'Safe Mode with Networking' and let us know how you get on. Share this post Link to post Share on other sites More sharing options...
hairybobby Posted September 6, 2006 Posted September 6, 2006 WEll going back to browser settings. All I have checked so far is within Internet explorers > internet options > connections Is there any other settings that could be wrong Share this post Link to post Share on other sites More sharing options...
Silverfox Posted September 6, 2006 Posted September 6, 2006 well in the browser, try changing autodetect settings and connecting through a LAN. and have you tried any of the things i mentioned in my last post? Share this post Link to post Share on other sites More sharing options...
hardnrg Posted September 6, 2006 Posted September 6, 2006 if you are a little wet behind the ears with networking (or like the quick n easy way) the windows xp network setup wizard is a godsend... i often use it because it's quicker to set up all the network settings and file/printer sharing than it is to do it all manually for two network adapters and a printer you shouldn't really have to use the commandline to set up a simple client pc, but it can be useful to troubleshoot the network settings of the pc AFTER you run the network wizard (for dns issues, firewall being over-zealous, etc) Share this post Link to post Share on other sites More sharing options...
hairybobby Posted September 8, 2006 Posted September 8, 2006 OK. one specific questionis this. Is there any settings for the BOIS that you have to change top enable internet. I know you have to enable USB ports sometimes Share this post Link to post Share on other sites More sharing options...
hardnrg Posted September 8, 2006 Posted September 8, 2006 you might have to enable the LAN controller if it is built into the motherboard (the RJ-45 Ethernet port is on the motherboard I/O shield with the rear USB ports, keyboard, mouse, etc)... you might have to install the drivers for an onboard LAN controller you might have to install the drivers for a PCI LAN controller... if you go to Control Panel > System > Hardware > Device Manager > Network Adapters do you see any entries? are there any exclamation marks there? Share this post Link to post Share on other sites More sharing options...
lilkev715 Posted September 8, 2006 Posted September 8, 2006 First off your initial info is lacking some important details... What kind of internet connection is it? Cable, DSL, etc. Is there a router? switch, hub? Is the ethernet cable going directly from the modem to the computer, or to a router/switch/hub first? Please give us a little bit more info on the setup to see if we can determine if its a hardware or software problem. Any model numbers/manufacturer info of the network equipment would be helpful as well. Share this post Link to post Share on other sites More sharing options...
hairybobby Posted September 13, 2006 Posted September 13, 2006 Thanks I got the problem solved. The device manager with the ethernet device(realtek) was installed but not enabled. Sorry for not posting back often but I do not get access to their computeres very often. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now