JaxonThomas Posted May 29, 2020 Posted May 29, 2020 I'm a very happy owner of: CPU: i7-6950x Memory: 32g DDR4 3200MHz Corsair Vengeance (4x8g) Water Cooler: Corsair H115i MOBO: ASUS Rog Strix x99 Gaming LGA 2011-v3 Power Supply: XFX 1250W PRO Series GPU: GTX 1080 HD: SSHD (2x2T) and 480g SSD Kingston UV400 And I never did an overclock in my life, I think it's good to point this out. So, I'm trying to overclock my memory to 3200MHz, because the MOBO runs it at 2400MHz at default, my processor to 4,2GHz and cache ratio to 3,2GHz. Here some pictures from my BIOS "AI Tweaker". The temperature is fine, around 75 degree celsius. The problem is that I can't get it to stabilize. I'm trying to run Prime95 stress test and after 10 minutes or so my computer freezes. Could you guys please give me some advices where I can adjust to make it perfect? Could it be memory? Could it be too much or too low voltage? Thank you. Share this post Link to post Share on other sites More sharing options...
ir_cow Posted May 29, 2020 Posted May 29, 2020 What happens when you enable the XMP profile for the memory? If they are 3200 sticks, it should be in the XMP profile. Share this post Link to post Share on other sites More sharing options...
Regenerati0n Posted July 17, 2020 Posted July 17, 2020 First off, use the recommended tools to test for RAM stability. Try to enable the XMP profile or enter timings and voltages manually. Use AIDA64 to read SPD and XMP data. Try to boost DDR and IMC (CPU Cache) voltages but don't over do. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now