SgtYoda Posted September 14, 2018 Posted September 14, 2018 Hi there!! So have this configuration: i5 6600K on Z170 motherboard GTX 1060 6gb SSD M2 250gb Dark Rock 3 cooler So want to OC i5 on 4.8 and just want to know if I get high temperature will it help to mount another fan on Dark Rock 3. I have one 135mm on one side.. Idea is to put 120mm on other side so there would be push-pull. Will I get better cooling? Thanks!! Share this post Link to post Share on other sites More sharing options...
Braegnok Posted September 14, 2018 Posted September 14, 2018 Welcome to OCC Sgt. That's a great single fan cooler,.. and adding push-pull with 120mm fan would lower your temps. BQ sends extra fan clips with dark rock 3 cooler for adding 120mm fan,.. you can buy Silent Wings 3 120mm PWM fan, Y-cable, and fan clips if you need them from PPCS. http://www.performance-pcs.com/be-quiet-silent-wings-3-120mm-pwm-high-speed.html Share this post Link to post Share on other sites More sharing options...
SgtYoda Posted September 15, 2018 Posted September 15, 2018 Thanks!! So basic.. my i5 6600k is OC on 4.5 and tower is ok, have two 140mm fans in front and one on back. And soon there will be two on top (120mm) On aida stress test I have top 70 Share this post Link to post Share on other sites More sharing options...
Braegnok Posted September 15, 2018 Posted September 15, 2018 (edited) 4.5GHz and 70c under load is vary nice OC with single fan air-cooler. Skylake chips tend to get a little hot at 1.4V,.. and most need that or more to run 4.8GHz stable. Edited September 16, 2018 by Braegnok Share this post Link to post Share on other sites More sharing options...
SgtYoda Posted September 16, 2018 Posted September 16, 2018 Must check bust I think I am stable on 4.5 and 1.320v.. and 70 Share this post Link to post Share on other sites More sharing options...
Braegnok Posted September 16, 2018 Posted September 16, 2018 You should be fine with 1.4V to 1.45V and 80c to 85c,.. https://docs.google.com/spreadsheets/d/1wQwYMGsSnMpKxrEesNVUSoP7hGykFWw1ygJsxwx64e8/edit#gid=0 Share this post Link to post Share on other sites More sharing options...
SgtYoda Posted September 18, 2018 Posted September 18, 2018 Now just waiting to new paste (Cooler MasterGel Maker Nano) arrive.. then will do OC on 4.8 with 1.385v and hope to get stabile config.. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now