Waco Posted October 28, 2011 Posted October 28, 2011 Did you try that ram at 1600 in the other board? (sorry if I missed it) Yup. Verified all the timings and subtimings as well. I hate my board. Share this post Link to post Share on other sites More sharing options...
iskout Posted October 28, 2011 Posted October 28, 2011 Yup. Verified all the timings and subtimings as well. I hate my board. Join the club Share this post Link to post Share on other sites More sharing options...
Waco Posted October 28, 2011 Posted October 28, 2011 I'm extremely tempted to sell it and buy a Gigabyte 1155 board. Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted October 28, 2011 Posted October 28, 2011 Waco.... Can you find and Install CPU-Tweaker and post up all you Secondary Sub timings....? this issue with all AMD boards is that Tref will set one ram slot very tight and the other very loose... you want to set all slots the same (the populated slots) and not as tight as the tightest one.... and too tight of a refresh rate will cause the ram not to be happy either....these all over work the memory controller and will cause issues....issues even more voltage cannot fix... try setting the Tref (slot frequency) to at least 110ns for both slots ( looser for 4 slots) and the refresh rate to either 7.8us or 15.6us Que Bypass Max to 15 or looser and Maximum Read Latency (MaxAsync) to 47 or looser (you may need 52-56) you may not have those settings in the BIOS and thats where a Modded BIOS really shines.... Share this post Link to post Share on other sites More sharing options...
Waco Posted October 28, 2011 Posted October 28, 2011 I can try tonight. Remember that this worked just fine prior to my FX fiasco though. Share this post Link to post Share on other sites More sharing options...
dr_bowtie Posted October 28, 2011 Posted October 28, 2011 yeps tells me a secondary stuck and isnt changing with the BIOS reverting... Share this post Link to post Share on other sites More sharing options...
Waco Posted October 28, 2011 Posted October 28, 2011 yeps tells me a secondary stuck and isnt changing with the BIOS reverting... Maybe. I'd be surprised if so through mutliple sets of RAM and full BIOS clears. Share this post Link to post Share on other sites More sharing options...
iskout Posted October 28, 2011 Posted October 28, 2011 I'm extremely tempted to sell it and buy a Gigabyte 1155 board. Er... again, Join the club. Share this post Link to post Share on other sites More sharing options...
Waco Posted October 28, 2011 Posted October 28, 2011 Er... again, Join the club. This board will be gone as soon as Newegg gets me my refund...then it's 2500K time. Share this post Link to post Share on other sites More sharing options...
Waco Posted October 29, 2011 Posted October 29, 2011 Waco.... Can you find and Install CPU-Tweaker and post up all you Secondary Sub timings....? this issue with all AMD boards is that Tref will set one ram slot very tight and the other very loose... you want to set all slots the same (the populated slots) and not as tight as the tightest one.... and too tight of a refresh rate will cause the ram not to be happy either....these all over work the memory controller and will cause issues....issues even more voltage cannot fix... try setting the Tref (slot frequency) to at least 110ns for both slots ( looser for 4 slots) and the refresh rate to either 7.8us or 15.6us Que Bypass Max to 15 or looser and Maximum Read Latency (MaxAsync) to 47 or looser (you may need 52-56) you may not have those settings in the BIOS and thats where a Modded BIOS really shines.... Here you go: I don't see anything amiss...am I missing something? I seriously think my memory controller is taking a dump. Share this post Link to post Share on other sites More sharing options...
ccokeman Posted October 29, 2011 Posted October 29, 2011 Welcome back to the dark side! Share this post Link to post Share on other sites More sharing options...
Boinker Posted October 30, 2011 Posted October 30, 2011 Welcome to Intel Waco. Hope you enjoy winning benches cause that is what we do. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now