gustie Posted July 17, 2011 Posted July 17, 2011 HI i have the titled fan controller and the manual isnt very comprehensive. I am wondering where to place the sensors to maximise the auto cooling feature. i have 4 case fans (might also use a 5th on side panel if i can fit it due to the d-14) where is it best to place heat sensors? they say near each fan but i was maybe thinking of using a few sensors on the cpu heatsink? so they all speed up if a little hot? anyone got one that could help me get the most from this? cheers Share this post Link to post Share on other sites More sharing options...
dihartnell Posted July 18, 2011 Posted July 18, 2011 (edited) I put one one the CPU heat sink, one by the GPU, One on the north bridge, and one by the top exhaust fan and another by the reaer exhaust fan. I used those temps to adjust the fan controller to reduce the temps. Edited July 18, 2011 by dihartnell Share this post Link to post Share on other sites More sharing options...
Boinker Posted July 19, 2011 Posted July 19, 2011 I put one one the CPU heat sink, one by the GPU, One on the north bridge, and one by the top exhaust fan and another by the reaer exhaust fan. I used those temps to adjust the fan controller to reduce the temps. Just make sure the temp probe is as close to the heatsource as possible. This will ensure that your controller gets he hottest and most accurate reading. Share this post Link to post Share on other sites More sharing options...
gustie Posted July 20, 2011 Posted July 20, 2011 thanks guys - i could stick one between the heatpipes on the cpu plate, that would be a good place i guess? Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now