aussieOC92 Posted February 17, 2011 Posted February 17, 2011 hi all you overclockers. just posting my results for IBT. i would prefer i5/i7 cpus. but you AMD ppl can also join in. first off i have my i7 2600K clocked to a very stable 4.6GHZ @ 1.34Vcore i have HT and TURBO BOOST disabled. i then did a IBT and set the Stress level to "STANDARD" and the threads to "4". i found that i had higher GFLOPS with HT disabled and i also had lower LOAD temps. anyways, i would appreciate it if you also post a screenshot of your results. many regards mitch. AUSSIE AUSSIE AUSSIE OI OI OI Share this post Link to post Share on other sites More sharing options...
Hoody_s13 Posted February 21, 2011 Posted February 21, 2011 (edited) Nice overclock mate, how stable is it at 4.6 with HT on? Have you tested dropping it back one multi too see if theres much difference in your GFLOPS? I noticed on my 980x that anything over 4.4ghz didnt yield much difference at all in relation to GFLOPS. I can run 4.4ghz stable HT on at 1.343v vcore, while at 4.6ghz stable HT on required 1.375v, but I was producing the same GFLOPS. I really didnt want to push the voltage past 1.375v to see if I could improve the speed anymore. Also the temps were getting a little high. With HT off on this same overclock, I reach 90 gflops average using the same testing settings. Edited February 21, 2011 by hoody_s13 Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now